MidG971
MidG971
It happens 😄 I have a Wifi adapter on the M.2 B slot, I'll do as you recommended.
Using the Rock 3A image is fine as far as: - I added my wifi info in the config file before booting the board. It worked fine, no NICs, but...
Its partially ok now : i'll give you a detailed report when I get home, but to be short, leds dont turn on when cable are plugged and only one...
@Joulinar : I wasn't aware of that, my bad. Report: Below I've got the two NICs plugged to my router, only eth0 aka eth2 physically is up. Even with a...
Here's more info : dmesg : ``` root@DietPi:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.12.7-current-rockchip64 (build@armbian) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld...
I plan to either use it as a WAN or LAN port for a firewall, or with eth0 as a part of a etherchannel / LACP port, not quite sure...
I tried your solution, the adapter won't show up, only eth0 & the wlan are available
after a check, I discovered that : ```` root@DietPi:/boot# cat dietpiEnv.txt rootdev=UUID=463087c8-1d8f-4075-b7b1-4b86c641e99e rootfstype=ext4 # The init system logs to the console defined last. consoleargs=console=ttyS2,1500000 console=tty1 usbstoragequirks= extraargs=net.ifnames=0 docker_optimizations=off overlay_path=rockchip overlay_prefix=rockchip...
Is there some benchmark or or test or procedure that I can do, for you to validate the support of the board ?
So it's 99.9% OK as I can't use both NICs at the same time yet...