sur_myevic

sur_myevic copied to clipboard

SME ( sur_myevic )

Документация на русском / russian manual

SME is a fork of myevic custom firmware for vaping mods from ClockSelect

Based on:

Original VTC Mini 3.03 firmware

Main Features:

The look-and-feel of the myevic firmware is more-or-less identical to the original firmware, so you shouldn't be lost.
All new features and options are made available through the menu system.

A list of some differences from the original firmware (google translate)

• allowable resistance from 0.05 Ohm in all modes.
• Repeat mode (replay) - simple replacement of the thermal control operation in the Power mode.
• Profiles to save different settings and quickly apply them.
• more configurable window-change timeouts.
• heating curves, smart preheating in Power, various heating algorithms in thermal control.
• the reaction time for a combination of buttons is shortened.
• there is no automatic power-down with a weak battery charge. It's honest.
• Varivolt mode, when the voltage does not change during the soaring.
• safety: stop fire, and then turn off the mode, if the fire button is pressed longer than the set hover cutoff.
• USB charge disconnection during overtemperature (for 2+ battery modes).
• automatic shutdown mode after reaching the user specified number of puffs or the operating time of the mod.
• in the information line, you can choose to display a set of important information, not just puffs and amps.
• in the first interface of the screen an additional information line is added, for greater clarity.
• the second screen mode, where the power and resistance lines are shown with large font.
• a short-time display of clocks in the off mode.
• turn off/on the charging screen of the mod by the minus button. Timeouts of the charging screen display.
• setting maximum values power, voltage, temperature, charging current (for 2+ battery modes), number of batteries for bypass.
• adjust the screen flip during tightening.
• smart screen inversion, does not show empty white screens.
• correction of the board temperature and determination of the resistance of the atomizer.
• more accurate display of resistance in idle time to the third sign.
• edit your battery profile from the mod menu.
• Reset resistance to the real current, without twisting the atomizer.
• setting the initial temperature of the resistance blocking for the thermal control mode, not only 20 degrees.
• selection for graphical display of all 1-2-3-4 batteries, percentage and voltage to choose from.
• Autofire. Hover with the specified tightening time without constant holding down the Start button. Infinite autofire.
• reset all counters at once; reset resetting counters if a fresh battery is inserted, or the battery is charged in box-fashion itself.
• counters of evaporated liquid and expended energy. The counter evaporated per day is reset automatically at midnight. Set the reset at midnight to other counters.
• a lot of options for animation 3D screensavers. Support for logos 64x40, 64x48.
• press plus button for information why mod is in off state.
• games Tetris and Flappy Bird for fun.

Old detailed English documentation for ClockSelect`s myevic may not be correct for this SME version! Read the Russian manual!

Документация на русском / russian manual

Thanks to:

* ClockSelect
* ReservedField
* Bane
* TBXin
* maelstrom2001
* Daveee10
* Eugene San
* MarkyAD
* bluenazgul
* Sharky1980
* gdb
* Dil3mm4 (en documentation)

And many others, supporting this project and taking the time to open or help solving issues.

Donations to buy mods for support by this firmware (for MicroSur): paypal.me/MicroSur