DaemonBite-Retro-Controllers-USB

DaemonBite-Retro-Controllers-USB copied to clipboard

Problem with a 6 buttons megadrive controller

18

Hi I made the controller adapter for megadrive (SegaTwoControllersUSB) tested under windows 10 with the windows game controller application i have several problems I use an official 6 buttons controller...

blc29seb

Hello MickGyver. I have a "original" NES controller with 10 buttons (up, down, left, right, select, start, A, B, Turbo A, Turbo B. Looks just like the regular NES controller...

alchle

3DO support - supports one controller, no headphone jack. Based on MickGyver's SNES code.

FluffyRedLobster

I would really love to connect two joysticks to my DaemonBite CD32ControllerUSB. Any ideas how to change the CD32ControllerUSB.ino to work with a second controller?

AlecVoid

I have added support for mode B (e.g. AvePad 6) for games like Street Fighter II. It has to be tested with two controllers!

GAsinPrieto

Adjusted the mask for the NTT buttons to allow the "disconnect" button to work, and also fixed an extraenous high/low being generated on PD7.

timville85

Tested with a NES-004E & SNSP-005. The SNESNTTControllersUSB sketch worked fine for me (0x3A) but the SNESControllersUSB didn't (0xF3A).

8bit-duck

[FR] Connect multiple controllers to the same Arduino Micro

1

is this possible by using different pins for the data wires while sharing the same power pins? (Obviously i will be using only one controller at a time.)

eadmaster

The Dreamcast controller runs at 5V natively, so there is no need for level shifting. Possible libraries to use: - https://github.com/Xerxes3rd/libmaple - https://github.com/ismell/maplebus

eadmaster

Could you make one for the Nintendo classic connector

5

Not a Issue but a feature request. I would love to use my Official Nes Mini Controllers

aihooo444