DaemonBite-Arcade-Encoder
DaemonBite-Arcade-Encoder copied to clipboard
MickGyver
An arcade controller project for the MiSTer FPGA project and any other device accepting USB HID joysticks. Up to 12 buttons are supported. Can also be used to create NeoGeo/Atari/Commodore/Amiga contr...
Get this error when compiling after installing HID-Project library. To fix it, need to comment out the following in "documents/Arduino/libraries/HID-Project/src/HID-project.h" #include "MultiReport/Gamepad.h" e.g. to: // #include "MultiReport/Gamepad.h" Then I was...
According to that documentation: http://wiki.icomp.de/wiki/DE-9_Joystick#2.2F3_Button_modification http://wiki.icomp.de/wiki/File:JoystickMod.jpg to have FIRE2 with C64 the pin 9 has to be pulled to VCC, not to GND. Right now FIRE2 works with DBAE only...
This device is on Windows PC shown as Arduino Micro and not as joystick and is not working. I need to have it shown as joystick or gamepad device with...
This is a question, rather than an issue: In the 'loop()' there is a for loop which counts to 10: ~~~ for(uint8_t i=0; i
right now im trying to use the program and so far so good sadly my arduino board (it's a Leonardo sold by a local electronic company) only have 13 digital...
Hello, I would like to know if it is normal for the product to automatically press keys or sometimes make key combinations? I tested with 2 neogeo controllers and I...
Error
> Arduino: 1.8.15 (Windows 10), Board: "SparkFun Pro Micro, ATmega32U4 (5V, 16 MHz)" > > C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program...
not sure if doable, btw some commercial controllers allow you to switch from XInputDInput mode for better compatibility with newer/older games. Another reason to switch back to DInput is to...
