Max Merz

Did this create a PVC for you? I can't find any in my cluster after applying the prometheusSpec..

@kebe7jun Thanks for your reply! I use k6 as load test tool and httpbin as the serverside counter part. I also tried it with the CNI mode, wich did not...

@kebe7jun Okay, I hope this comment will help you reproducing everything you need: # General The aim of my loadtests is to verify weather eBPF can improve service mesh networking...

Hey @kebe7jun, first, thanks for investigating the issue! :) However, two questions have arisen for me: 1. In the [standard deployment file in line 72](https://github.com/merbridge/merbridge/blob/main/deploy/all-in-one.yaml#L72) the CNI mode is disabled....

I used the CNI mode in the past as well but the results did not show any improvement, compared to the "standard" Merbridge mode. Test1: > http_req_duration..............: avg=26.87ms min=2.54ms med=6.82ms...

@kebe7jun I tested the ambient implementation and these are my results: Test1: > http_req_duration..............: avg=17.65ms min=2.33ms med=4.71ms max=800.27ms p(90)=24.61ms p(95)=61.99ms Test2: > http_req_duration..............: avg=16.4ms min=2.35ms med=4.7ms max=733.69ms p(90)=29.11ms p(95)=76.3ms Test...

@kebe7jun I just executed k6 3 times to get several test results.

@kebe7jun It could be that other applications affect it, but I have no idea which ones. On the other side, the results measured with "plain" calico and without Merbridge display...

@kebe7jun You are right that the underlying infrastructure is not the best for load tests. Additionally I am surprised, that your setup's latency is less then 20% of my measured...

@kebe7jun This should make a hudge difference.. In my configurationt I run 250 Pods which are all registered as endpoints in 250 Services.