Memtwo

> You can add a Print on node2 to verify. Also in Node1 you target the DST mac address of Node 3 so I doubt you hop through node2 indeed....

> > How can I make sure it is hop by hop which node1 send packet to node2, then node2 send packet to node3 > > Physically connect the ethernet...

Sorry since I am nearly newbie to click, I really don’t know how to modify it. May I trouble you to give me a more specific configuration example?

> I'm following the issue because I also have to study a very similar case. > My setup is as follows: > I have three different nodes in the order...

> Hello, in my case SRCETH and SRCIP are the Mac and the IP of node one, but DSTETH and DSTIP are on the node3(sink) . My topology is source--->VNF--->sink...

> Yes just FD->Queue->TD. > > You have to enable promiscious mode to in and out interfaces in order all the traffic to be able to pass. But it seems...

Oh use tcpdump can see the packet from node1 to node3 I think it works. Thank you very much!

sorry for trouble you after a long time. I am still newbie to Click and doubt my setup doesn't work well here's my setup: Node1 (source) --> Node2(forward) --> Node3...

Thanks! Do you mean I should set node1's DST to node2, then on node2 use EtherRewrite element and set it's DST to node3?

> Hello, you can start wuth a simple setup with three different PCs, a Source a Bridge and a Sink. > > On the source, you can have a click...