Felix

Hi have modified a Ford OBD adapter with a PIC18F25K80 chip. These adapters have a toggle switch to switch between different CAN networks of Ford. I changed the connections from...

> > Hi have modified a Ford OBD adapter with a PIC18F25K80 chip. These adapters have a toggle switch to switch between different CAN networks of Ford. I changed the...

Looks good to me :)

> > > > Looks good to me :) > > so it can be used for renault and dacia cars? I think so, but only after you change the...

> thanks friend , but i assume they was already change the wires in this modul, because the y put a switch , is that correct? You are right, but...

> > What about pic18F25K80 ... is it required or not for DDT4all and Renault/Dacia Cars? the one the link is showing does not have it... it apears! It says...

Yes it will work. You will have to edit the radio and carminat settings aswell. Both ecu's will appear if you do a scan. No need to know what xml...

Take the one that is closest to the detected ecu.

Here you go. This is from a Kadjar, should be the same pinout. Pin | Signal | Signal label -- | -- | -- 1 | 107W | DIAGNOSTIC SOCKET...

You need to change a byte in the eeprom. Not possible through OBD as far as I know.