MaxineMuster

> I think i figured out why Beken ota generation crashed with `malloc(): corrupted top size` Most likely image name is too long. Limit is probably 64 chars, and it...

Maybe you can take a look at this PR #1689 ? It should at least make BSSID visible in status (there was a discussion about that in elektroda.com https://www.elektroda.com/rtvforum/topic4052871.html ,...

Exacly, hovering was my idea, too - see elektroda.com thread. If you are willing to test, you could try by installing the "artifacts" from that PR on your device: https://github.com/openshwprojects/OpenBK7231T_App/actions/runs/15853097645...

Maybe you can use "code" with line breaks to make the content better readable? Is NTP working at all? I ask, because you want the script to wait until NTP...

I meant a quote not for a line but the whole block, like this ``` //clearIO //Flags 0 PowerSave 1 Flags 134743044 startDriver NTP ntp_setServer fritz.box ntp_timeZoneOfs 2 waitFor NTPState...

> From the UART console, on every power cycle, I get the following output: "Console init ok! ready" > Probably to late, but which uart did you use? LN882H has...

First: this is only a rough estimation about the chip temperature Is this a lamp with W600? They usually get quite hot because of the small housing and other components...

Will powersave work @divadiow ? On my W800 it seems to have no impact (at least on the temperature).

W800 with "powersave" in startup command: Temperature seems indeed lower - it's down to ~ 52° now (used to be 57 without). Edit: Looks like coincidence - no change if...

Just to clarify: The "savetemps" firmware will not change anything but just add the graph to see the temperature over the time...