MagicImageWand
MagicImageWand copied to clipboard
reboot necessary
Dear Martin,
today I used the first time led stripes on the MIW. I have the software version 2.07 on it. When it boots and the version appears on the ttgo also the led on the stripe (I have only on mounted) runs with rainbow color from start to end and back. So for me everything is right. The point is, that I can´t run the images on the led. The preview and all other menues etc. are working, but the led strip doesn´t react. Only after reboot, with the reboot function in the menu it is working. It doesn´t matter if I put the power with USB C directly on TTGO or with the battery power over the PCB V1.2. Batterypower I use 2x 18650cells in line.
With the batterypower I have another phenomen. The TTGO doesn´t start. I can meassure 5V on pin1 and 3,3V on pin12 also I have 5V on D1 top or on PCB points LED3 and LED4. So for me it looks fine. But I have to press, the small reset button on the side. I don´t have added the frame sensor or any other things on the pcb, just one led stripe at LED1, could this be the reason? But when I power the ttgo with USB-C direct it works without pressing the reset button update: it looks that the starting issue is related to the ttgo directly. Because I used another ttgo and the starting is solved, but not the first point (reset needed)
Hope you can support. Tobias