Martin Böh

icon indicating a website link https://martb.dev icon indicating an email [email protected]

icon company FinaPlus icon location Germany icon location Informatics master student at rptu.de with a passion for C-based languages and embedded + home automation hardware. Hobbyist audio and repair enthusiast.

Results 54 comments of Martin Böh

Wrong scale for Inverter Power?

Guess it makes sense to fix it then and remove the workaround as we can't tell to which version this once was applicable.

Help translate the web interface via weblate

Is weblate borderline unusable for anyone else here? Their servers / software are always incredibly slow for me.

Help translate the web interface via weblate

@aparcar Im sitting in germany

Fix same-host JMAP redirection on non-standard ports

tested and working

Add Export Limit control for KH inverters

41012 with u32 also works for H3 after 180 (as far as I can confirm) Been using it for a while.

Latest ESP-IDF Version breaks UART Connectivity - and downgrading breaks I2C (from 8.2)

So what the plan with this? I used GPIO43 TX and 44 RX on my waveshare_esp32_s3_zero and i have the same symptoms. Any fix in sight?

🪲: stalwart-cli: JMAP-related actions fail when target host/listener on non-standard port

I can confirm that it works :)

FoxESS KH10.5 EPS and Load entities reversed?

Yes I found a discrepancy for H3 and the correct registers to use, i will create a pr on the weekend.

wrong H3 register used for invbatpower in remote_control_description.py

Can confirm this is the case for the battery power register, this will be fixed with my PR. For 2: This seems to be intended, but i cant tell how...

Force charge changes work mode to backup-up

https://github.com/nathanmarlor/foxess_modbus/blob/main/custom_components/foxess_modbus/remote_control_manager.py Has a ton of back up mode references, most likely you are hitting one of these.