[BUG] Artillery Sidewinder X2 Controller Fan not working

[Schalonsus]

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

With stock firmware the controller fan starts spinning when heat bed is over 50°C or stepper motors are working With bugfix-2.1.x there is only a clicking sound from the controller fan, never turns on With 2.1.2.1 the controller fan starts spinning over 50°C but then stalls and just make clicking sound

I lowered #define CONTROLLERFAN_SPEED_ACTIVE from 255 to 240 and then the controller fan is working like expected

Bug Timeline

No response

Expected behavior

Heat bed over 50°C or stepper motor working the controller fan starts spinning

Actual behavior

Controller fan does not start spinning only clicking sounds

Steps to Reproduce

No response

Version of Marlin Firmware

2.1.2.1

Printer model

Artillery Sidewinder X2

Electronics

No response

LCD/Controller

No response

Other add-ons

No response

Bed Leveling

None

Your Slicer

None

Host Software

None

Don't forget to include

• [X] A ZIP file containing your Configuration.h and Configuration_adv.h.

Additional information & file uploads

config.zip