Configurations
Configurations copied to clipboard
MarlinFirmware
Configurations for Marlin Firmware
MakerTech 3D, Proforge 2s Dual. ### Requirements * Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion. ### Description Provide...
This is a catch-all for all "me too" configuration requests. If you can submit partly or fully working configs for printers we don't yet support, please do, as we rely...
Configuration files for Folger Tech FT-5 to update firmware to Marlin 2.1.1 Requirements Marlin 2.1.1 Description Updated configuration files for default configuration of FT-5 (Folger Tech). Benefits Optimized acceleration, Jerk,...
### Bug Description I am Using Artillery Genius (not pro edition) If BL-Touch is on, the movement in X axe with more then 210mm is wrong because the Z axe...
### Description Park at X min to avoid LCD and update BX readme.
### Requirements ### Description This is one of two possible fixes (A and B) to bug #771; They are mutually exclusive - please only merge one of them. This fixes...
### Requirements ### Description This is one of two possible fixes (A and B) to bug #771; They are mutually exclusive - please only merge one of them. This sets...
Z-Endstop on Chitu V8 boards seems to remain in triggered state after pressed once and released. As such this makes it impossible to home Z properly or print. A workaround...
### Description Dual Z config with onboard TMC2209s needs matching Z1 & Z2 settings. I checked the other E3 Turbo-based configs and the only other one with dual-z enabled has...