craftbeerpi3
craftbeerpi3 copied to clipboard
Manuel83
MAX31865 Dual Channel Code
Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(
For the terminals in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157
you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2
2018-05-06 19:37 GMT-03:00 KenCope [email protected]:
Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j-xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .
I have it set up that way. I thought it would work just like any other 31865. From what I’m gathering from Playin With Fusion is that it takes a different program.
Thanks.
From: Eduardo Spremolla [email protected] Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)
For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157
you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2
2018-05-06 19:37 GMT-03:00 KenCope [email protected]:
Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j-xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6 .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387106331, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6.
Tray to set CS2 to 3.3v and connect the other as a normal Max31865 board to verify.
2018-05-07 21:36 GMT-03:00 KenCope [email protected]:
I have it set up that way. I thought it would work just like any other 31865. From what I’m gathering from Playin With Fusion is that it takes a different program.
Thanks.
From: Eduardo Spremolla [email protected] Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)
For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157
you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2
2018-05-06 19:37 GMT-03:00 KenCope [email protected]:
Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread <https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j- xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6> .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387106331>, or mute the thread<https://github.com/notifications/unsubscribe- auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6>.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387247988, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcRyedCqMM4NgRnxeRG8Z4dDx34CDks5twOiRgaJpZM4T0Od6 .
What will applying 3.3V to CS2 do?
From: Eduardo Spremolla [email protected] Sent: Tuesday, May 8, 2018 7:56 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)
Tray to set CS2 to 3.3v and connect the other as a normal Max31865 board to verify.
2018-05-07 21:36 GMT-03:00 KenCope [email protected]:
I have it set up that way. I thought it would work just like any other 31865. From what I’m gathering from Playin With Fusion is that it takes a different program.
Thanks.
From: Eduardo Spremolla [email protected] Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)
For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157
you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2
2018-05-06 19:37 GMT-03:00 KenCope [email protected]:
Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread <https://github.com/notifications/unsubscribe-auth/AK4bcTgvjddjKUwIF66j- xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6> .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387106331>, or mute the thread<https://github.com/notifications/unsubscribe- auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6>.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387247988, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcRyedCqMM4NgRnxeRG8Z4dDx34CDks5twOiRgaJpZM4T0Od6 .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387378282, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AglZ7DJsogLtDGqYLonkboPGgKAUfrYJks5twYffgaJpZM4T0Od6.
Disable the second channel
2018-05-09 22:41 GMT-03:00 KenCope [email protected]:
What will applying 3.3V to CS2 do?
From: Eduardo Spremolla [email protected] Sent: Tuesday, May 8, 2018 7:56 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)
Tray to set CS2 to 3.3v and connect the other as a normal Max31865 board to verify.
2018-05-07 21:36 GMT-03:00 KenCope [email protected]:
I have it set up that way. I thought it would work just like any other 31865. From what I’m gathering from Playin With Fusion is that it takes a different program.
Thanks.
From: Eduardo Spremolla [email protected] Sent: Monday, May 7, 2018 11:39:26 AM To: Manuel83/craftbeerpi3 Cc: KenCope; Author Subject: Re: [Manuel83/craftbeerpi3] MAX31865 Dual Channel Code (#187)
For the terminal in the picture http://www.playingwithfusion.com/imgviewer.php?pdid=30&imgid=1157
you have to configure as 2 separated boards, one with CS on the GPIO connected to CS1 and other with CS2
2018-05-06 19:37 GMT-03:00 KenCope [email protected]:
Would anyone be willing to write the code to utilize the Playing With Fusion dual channel MAX31865? I've tried using their examples without success. I purchased two of them and cannot get to work :-(
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187, or mute the thread <https://github.com/notifications/unsubscribe- auth/AK4bcTgvjddjKUwIF66j- xjCiCgCM_ylks5tv3sPgaJpZM4T0Od6> .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387106331>, or mute the thread<https://github.com/notifications/unsubscribe- auth/AglZ7BTdWGkmgRgSl_ODQbxHrnFF2x2-ks5twGqugaJpZM4T0Od6>.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/Manuel83/craftbeerpi3/issues/187# issuecomment-387247988>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ AK4bcRyedCqMM4NgRnxeRG8Z4dDx34CDks5twOiRgaJpZM4T0Od6> .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://github.com/ Manuel83/craftbeerpi3/issues/187#issuecomment-387378282>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ AglZ7DJsogLtDGqYLonkboPGgKAUfrYJks5twYffgaJpZM4T0Od6>.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Manuel83/craftbeerpi3/issues/187#issuecomment-387924767, or mute the thread https://github.com/notifications/unsubscribe-auth/AK4bcXSnkZaNS9tzhPS_bL-aUcrBhjnqks5tw5rOgaJpZM4T0Od6 .