MacH-21

Hi mczakk, 1. Could you give a link to your weather station user manual. 2. Does your weather station have a solar panel? 3. Could you try this command for...

I think you are on the right track. I use SDR Console to see the frequencies (my system is windows 10 x64) See attached screen shot-  You can...

I can see from your screenshot2, that your weather station is 868.22M and 868.34M, I would sample at 868.28M (middle), But you also seem to have a regular signal at...

Hi, Interesting re-bresserUK, Re; the ID: change rtl_433 reports the correct ID, MQTT Event displays incorrect ID. You seem to have had this from day one your OP states via...

HI, one thing is different - the id value, any idea why? ID value 939865349 is Your station in Decimal format - ID (38053505)hex  .

Hi Christian/Gollam, I took a look at the received data, All looks good to me RTL_433 should not report Rain when Flags : 0 I have included a text file...

@Gollam, Thanks for quick reply, The reason for asking is I am testing the unknown bits/flags of the Bresser protocol, when you have low battery symbol please post data captures...

@Gollam, Thanks for Screenshot and Zip I will check out samples later. @zuckschwerdt I was hoping for a bit that indicates temp or rain, but I never found that bit....

[Bresser6in1-Sencor5in1.txt](https://github.com/merbanan/rtl_433/files/9852906/Bresser6in1-Sencor5in1.txt) edited in notepad++ @Gollam I could not test the low battery samples as the file seems to be corrupt (signal clipping) can you retest/resend if possible. >what is the...

@zuckschwerdt Can you please check my post on #1214 This old chestnut, Rain is not valid when flags = 0