Unable to build MK4Duo without LCD.

[BoHoehne]

Issue description

Unable to build MK4Duo without LCD.

Firmware version

MK4duo 4.4

My setup

RUMBA32 with 6x TMC5160 Delta with sensorless homing and sensorless endstops NO LCD

Configured with online configuration tool.

The errors are:

C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\lcdui.cpp: In static member function 'static void LcdUI::status_printf_P(uint8_t, const char*, ...)': C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\lcdui.cpp:44:3: error: 'va_start' was not declared in this scope va_start(args, message); ^~~~~~~~ C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\lcdui.cpp:44:3: note: suggested alternative: 'pwm_start' va_start(args, message); ^~~~~~~~ pwm_start C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\lcdui.cpp:46:3: error: 'va_end' was not declared in this scope va_end(args); ^~~~~~ C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\lcdui.cpp:46:3: note: suggested alternative: 'rand' va_end(args); ^~~~~~ rand "C:\Users\subausa\AppData\Local\Arduino15\packages\STM32\tools\arm-none-eabi-gcc\8.2.1-1.7/bin/arm-none-eabi-g++" -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb "@C:\Users\subausa\AppData\Local\Temp\arduino_build_431257/sketch/build_opt.h" -c -Os -std=gnu++14 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -MMD "-ID:\3D-Drucker\Delta\Rumba32\MK4duo\MK4duo" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino/avr" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino/stm32" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino/stm32/LL" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino/stm32/usb" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino/stm32/usb/hid" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino/stm32/usb/cdc" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/Drivers/STM32F4xx_HAL_Driver/Src/" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/STM32F4xx/" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/Middlewares/ST/STM32_USB_Device_Library/Core/Inc" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/Middlewares/ST/STM32_USB_Device_Library/Core/Src" -DSTM32F4xx -DARDUINO=10810 -DARDUINO_RUMBA32_F446VE -DARDUINO_ARCH_STM32 "-DBOARD_NAME="RUMBA32_F446VE"" -DSTM32F446xx -DUSBCON -DUSBD_VID=0x0483 "-DUSB_MANUFACTURER="Unknown"" "-DUSB_PRODUCT="RUMBA32_F446VE"" -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\tools\CMSIS\5.5.1/CMSIS/Core/Include/" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\cores\arduino" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\variants\RUMBA32_F446VE" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\libraries\SPI\src" "-IC:\Users\subausa\Documents\Arduino\libraries\TMCStepper\src" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\libraries\SoftwareSerial\src" "-IC:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\libraries\Wire\src" "C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\menu\menu_delta_calibrate.cpp" -o "C:\Users\subausa\AppData\Local\Temp\arduino_build_431257\sketch\src\lcd\menu\menu_delta_calibrate.cpp.o" Mehrere Bibliotheken wurden für "SPI.h" gefunden Benutzt: C:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\libraries\SPI Mehrere Bibliotheken wurden für "TMCStepper.h" gefunden Benutzt: C:\Users\subausa\Documents\Arduino\libraries\TMCStepper Mehrere Bibliotheken wurden für "SoftwareSerial.h" gefunden Benutzt: C:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\libraries\SoftwareSerial Mehrere Bibliotheken wurden für "Wire.h" gefunden Benutzt: C:\Users\subausa\AppData\Local\Arduino15\packages\STM32\hardware\stm32\1.7.0\libraries\Wire

===============================================

Any help would be greatly appreciated.

Please be patient, we'll be trying to help you as soon as possible.