MAGADE
MAGADE
Thanks to your answer, with usbhid-ups driver, the I'm using now nutq-qx driver cause it tell more information than usbhid-ups usbhid-ups online state is OB nutq-qx online state is OL...
```` > :; /lib/nut/nutdrv-qx -a aeg -DDDDDD -d 1 root@DARYL:/home/magade# systemctl stop nut-client root@DARYL:/home/magade# systemctl stop nut-server root@DARYL:/home/magade# systemctl stop nut-monitor root@DARYL:/home/magade# systemctl stop nut-driver Failed to stop nut-driver.service: Unit...
> For service-stopping, please check if you have a `[email protected]` instance which wraps the single driver? root@DARYL:/etc/nut# [email protected] bash: [email protected]: command not found root@DARYL:/etc/nut# systemctl list-units --type=service | grep nut...
WITH DRIVER USBHID-UPS activate in ups.conf ``` root@DARYL:/etc/nut# :; /lib/nut/usbhid-ups -a nutdev1 -DDDDDD -d 1 Network UPS Tools - Generic HID driver 0.47 (2.8.0) USB communication driver (libusb 1.0) 0.43...
If it could be helpful ``` root@DARYL:/etc/nut# nut-scanner Scanning USB bus. No start IP, skipping SNMP Scanning XML/HTTP bus. No start IP, skipping NUT bus (old connect method) Scanning NUT...
> > see ups/status is wrong "OB" cause there are AC input on 230V > > Yes, the device does not actually talk USB HID properly, but just seems to...
> Also, for large "text screenshots", please wrap them into lines of 3 or 4 backticks (same count on start and finish), so they would be formatted as code blocks...
Just in case it is useful with usbhid-ups ```` root@DARYL:/etc/nut# systemctl stop [email protected] root@DARYL:/etc/nut# :; /lib/nut/usbhid-ups -a nutdev1 -DDDDDD -d 1 Network UPS Tools - Generic HID driver 0.47 (2.8.0)...
> Thanks, this part looked promising: > > ``` > 9.642409 [D3] send: Q1 > 9.891440 [D5] read: (47 bytes) => 28 32 33 31 2e 31 20 32 33...
blazer_usb seem to get a little bit more info ``` root@DARYL:/home/magade# upsc nutdev1 Init SSL without certificate database battery.voltage: 2.20 battery.voltage.high: -1.08 battery.voltage.low: -0.87 device.type: ups driver.name: blazer_usb driver.parameter.bus: 001...