TPS5430
TPS5430 copied to clipboard
M4a1x
TPS5430 based DC-DC Buck Converter Module with parts from JLCPCB
Usually, I have either my Laptop/Desktop around or one of those cheap barrel jack power supplies. To make this board even more versatile I could add a USB-C plug with...
JLCPCB (Susie) reached out, because of the rotation of the screw terminal. There might be a rotation issue in the position file that I should verify.
As the connectors are often soldered by hand at JLCPCB (check!), there'd probably be no difference in pricing if they were to be placed on the back side to make...
Brings down cost (as it doesn't need to be hand soldered)
Makes usage easier. Maybe also label the solder jumpers as output.
 ``` TAJB107K006RNJ C16133 1.7Ω 100kHz 6.3V -55℃~+125℃ 100uF ±10% CASE-B_3528 Tantalum Capacitors ROHS ``` Your schematic considered to use 12V for output. But output capacitor does not consider to...
Since it doesn't require any parts, I think moving just the solder jumpers (and any test points) to the back side would be a good idea to save some space...