seems not all parameters are there

[paqpaqpaq]

This my config:

scanconfig: true loglevel_all: notice mqtttopic: ebusd mqttint: /etc/ebusd/mqtt-hassio.cfg mqttjson: true mode: enh network_device: 192.168.108.39:3335 configpath: /config/ebusd-configuration/ebusd-2.1.x/en

2ad9b828-ebusd:/# ebusctl info version: ebusd 23.2.p20230716 update check: version 23.3 available, broadcast.csv: different version available, memory.csv: different version available, vaillant/08.hmu.csv: different version available, vaillant/broadcast.csv: different version available, vaillant/errors.inc: different version available, vaillant/general.csv: different version available, vaillant/hcmode.inc: different version available device: 192.168.108.39:3335, enhanced signal: acquired symbol rate: 122 max symbol rate: 173 min arbitration micros: 1 max arbitration micros: 75 min symbol latency: 15 max symbol latency: 55 scan: finished reconnects: 0 masters: 5 messages: 235 conditional: 0 poll: 89 update: 15 address 03: master #11 address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0902;HW=5103", loaded "vaillant/08.hmu.csv" address 10: master #2 address 15: slave #2, scanned "MF=Vaillant;ID=CTLV3;SW=0709;HW=3704" address 31: master #8, ebusd address 36: slave #8, ebusd address 71: master #9 address 76: slave #9, scanned "MF=Vaillant;ID=VWZIO;SW=0202;HW=0103" address f1: master #10 address f6: slave #10, scanned "MF=Vaillant;ID=NETX3;SW=0119;HW=0404"

Despite pointing at a custom file for my 08.hmu, it seems it is not loading the correct csv? The display of the Vaillant VZWAI e.g. does show compressor RPS, modulation rate, flow, etc, but the output of the addon does not. These parameters are present though in the linked csv

How can I address this issue?