Luca Dall'Acqua

No problem I have this one and just soldered 4 jumper wires to the sd headers: https://www.amazon.com/HiLetgo-Display-ILI9341-Touch-240x320/dp/B07WNLNRDN/ref=mp_s_a_1_2?crid=15A0XJBGPHXDR&keywords=tft+touchscreen+with+ili&qid=1691604495&sprefix=tft+touchscreen+with+ili%2Caps%2C274&sr=8-2 Fun fact: the pen that they give u is the exact same as...

same here but in my case is instantly after start up i see the log in for a split second

try `nano /etc/default/grub` ``` .... GRUB_CMDLINE_LINUX_DEFAULT="pwm-lpss pwm-lpss-platform acpi_osi= i915.modeset=1 fbcon=rotate:1 video.use_native_backlight=1 i915.enable_fbc=1 i915.enable_rc6=1 i915.semaphores=1 quiet splash resume=UUID={arleady present}" .... ``` save ``` update-grub reboot ``` among a lot of stuff...

also put the following missing firmware bins in `/usr/lib/firmware/i915` (you can use wget to download) https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/dg2_huc_gsc.bin https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/mtl_guc_70.bin https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/mtl_huc_gsc.bin commands ``` mkdir firmware cd firmware apt update apt install wget wget...

Thanks, analyzing the calls from the website of the DVR it seems that the stop is preset -1, but I can't sand it thru home assistant, would you mind helping...

I already tried it doesn't let me go below 0

OMG thank you soo much

hi, @dbuezas i have changeed the line to -10 but i am still getting error `Failed to call service icsee_ptz/move. value must be at least 0 for dictionary value @...

Yes, I did, even tried restarting the whole OS

You mean deleting and adding it again? And yes but I need it to make the movement stop since the Stop does not work