MBW.BlueRiiot2MQTT
MBW.BlueRiiot2MQTT copied to clipboard
LordMike
Not all the data it seem to be
Best Mike.
Can you please help me? Ik have add and install the addon and I have some sensors;
In my MQTT the other sensors are Coming in;
Only the vallue’s of that sensors ( ph, temp, orb ) are not visible in my dashboard.
I hope you can help me with this. Of you need somthing, let me no.
Best regeards, Marcel
Hmm, that is odd. Is your BR sensor active and working, and otherwise reporting in values?
If it is, then it should appear. You can try raising the log levels and see what comes of it. I'd be interested in some of the json coming back from BlueRiiot, which should show us what's up.
The blueriiot app on my iphone is working fine, i have premium subscription but no wifi externder
in the broker logfiles i see some strange behavior:
Sorry but im not that familiar with HA yet, just a beginner so im not quite sure how the rais op the log levers.. sorry
this is a view within the MQTT explorer:
That is weird behavior. Do you know if the ip (..32.2) belongs to blue riiot ?
It could also be HA itself - or maybe you have a third application using mqtt.
From: robertjan @.> Sent: Thursday, August 18, 2022 11:28:38 AM To: LordMike/MBW.BlueRiiot2MQTT @.> Cc: Michael Bisbjerg @.>; Comment @.> Subject: Re: [LordMike/MBW.BlueRiiot2MQTT] Not all the data it seem to be (Issue #71)
The blueriiot app on my iphone is working fine, i have premium subscription but no wifi externder
in the broker logfiles i see some strange behavior: [broker_logbook]https://user-images.githubusercontent.com/4417551/185360887-0aee2bb1-b635-4ebe-bd12-858ec2b44365.jpg
Sorry but im not that familiar with HA yet, just a beginner so im not quite sure how the rais op the log levers.. sorry
— Reply to this email directly, view it on GitHubhttps://github.com/LordMike/MBW.BlueRiiot2MQTT/issues/71#issuecomment-1219250266, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AAH2YJ2B6QT2YOPOJ4HRDITVZX64NANCNFSM5ZE77KNA. You are receiving this because you commented.Message ID: @.***>
Just saw the last picture. So only two clients, this and HA.
That’s so weird. In the discovery document you’ve found, the state topic is set to “sarah/…” - but I have no idea why it would be that. It should be “blueriiot” by default.
Could you post your config for blueriiot2mqtt?
I have quite the same setup as Marcel in MQTT, for the test i did change the sarah/ to blueriiot but als that did not change anything.
Status is online but the sensors getting 0 on request
Hey again,
Sorry for the delay - I'm busy elsewhere. You didn't get this solved, did you? I've booted up my Blue Riiot (my pool wasn't used this year), and it updates data just fine - so that parts working.
What's odd on your end is this "sarah" in your state_topic. For some reason, the discovery document (the one you showed) says that the state must be fetched from this topic (sarah/) - and in Robertjans' case, blueriiot - which apparently should be hass-blueriiot..
Looking at the code, the TopicPrefix is blueriiot - why it's sarah and hass-blueriiot here - I don't know.
You could try changing this setting, for env vars its HASS__TopicPrefix and in the addon there should be a json setting under HASS and then TopicPrefix.
For @marcel-1984 - you should set yours to sarah, and @robertjan to hass-blueriiot. Then hopefully the discovery doc will sync up with the actual values being pushed, and you should receive data.
If either of you know why these values would differ on your end, I'd be happy to know :P
Hello, good afternoon.
I am new to all this and the truth is that I am quite lost.
I have installed ADDON and I have configured it as I show you:
But I only get the following sensors created:
What do I still need to do to show me the sensors that show you?
It doesn't show me the temperature, chlorine, etc....
What am I doing wrong? The truth is that I am very lost in this subject and I do not know what to do.
For what it's worth I also show you the Log:
Thank you very much in advance.
Best regards.
Try putting in just the ip in the mqtt server. You should get two devices when it works.
Mike.
From: KikoSerranoH @.> Sent: Thursday, April 20, 2023 3:14:00 PM To: LordMike/MBW.BlueRiiot2MQTT @.> Cc: Michael Bisbjerg @.>; Comment @.> Subject: Re: [LordMike/MBW.BlueRiiot2MQTT] Not all the data it seem to be (Issue #71)
Hello, good afternoon.
I am new to all this and the truth is that I am quite lost.
I have installed ADDON and I have configured it as I show you:
But I only get the following sensors created:
What do I still need to do to show me the sensors that show you?
It doesn't show me the temperature, chlorine, etc....
What am I doing wrong? The truth is that I am very lost in this subject and I do not know what to do.
For what it's worth I also show you the Log:
Thank you very much in advance.
Best regards.
— Reply to this email directly, view it on GitHubhttps://github.com/LordMike/MBW.BlueRiiot2MQTT/issues/71#issuecomment-1516307330, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AAH2YJ5CUWUSKJJSKCXEIFLXCEZBRANCNFSM5ZE77KNA. You are receiving this because you commented.Message ID: @.***>