lora_gateway
lora_gateway copied to clipboard
Lora-net
Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.
Cambie todos los flags a 1 para poder visualizar todas las informacion del programa.
Hello all, I need some help with a DLOS8 LoRaWAN Gateway, it was working a week ago, I unplugged and restarted outside of my office and now I keep getting...
I've been through countless forums discussing the same issue, but with no luck. I'm trying to setup the WiMOD Lite Gateway (Raspberry Pi 2 B+ and iC880A-SPI) with the lora_gateway,...
Hi! Please, how can we create an LoRa repeater? Have anybody already tried? By a LoRa repeater i mean receive one LoRa package and re-transmit without connect to any Network...
I use rak2247 module with onion omega board which have mips architecture. I use openwrt distrobution on omega. I build cross compilation successfully and when i run spi test software...
Can someone explain after set IOT_SK_SX1301_RESET_PIN as gpio output in line 30 and do reset, why it need to set as gpio input in line 37? Does it really necessary?...
ARIB STD-T108 Version 1. 3 Lists 400ms tx duration from start of transmission is allowed. The packet forwarder is counting time between channel was free and start of transmission in...
I am trying to communicate Raspberry Pi board to ic880A-spi over spi .At spi speed 1 MHz its working fine but at 8 MHz sometime its working or sometime not...
Hi，all： Description details: recently,a problem about Lorawan node retransmission confused me , I've found many issues about it in github and repeated to find some information in Lorawan protocol, some...
