LoloBee

Hi! I'm also working on S8 and I faced the same issue. After checking this [paper](https://pdfs.semanticscholar.org/078e/bf9f4c7916e59db4711e726ee94e2e802d54.pdf) you can read that > The firmware that resides in ROM can simply be...

Ok DHD_DEBUG flag is set in Makefile by hand, but after building, no successwith dhdutil neither nexutil.

Hi Matthias, great to read you again. The interface name is wlan0, and the result of -g0 is meaningful or I think so `dreamlte:/ # nexutil -g0` `0x000000: 77 6c...

UCODE compression is used when patching firmware, I can extract code used to do this, but I don't think got enough luck. Anyway, if you need SSH access to an...

Hi @tech5drive From my side, bcm4361 driver seems to have DHD_DEBUG enabled in MakeFile. I'm using [TGPKernel-s8](https://github.com/TheGalaxyProject/tgpkernel-s8-o) kernel, because I can build original Samsung S8 kernel, but Oreo's boot.img is...

Great news Matthias. I'll test it this afternoon and I'll report results. Thx!

Hi Matthias! I got exactly the same firmware version ``` 4361b0-roml/config_pcie_release_ipa Version: 13.38.55.1 (B0 Network/rsdb) CRC: 5c68b38e Date: Fri 2018-06-15 19:16:56 KST Ucode Ver: 1181.2019 FWID: 01-b97cda56 ``` Rom extraction...

Absolutely yes! Let me set a machine up and I'll give you access. Thanks!

I've send you an email @matthiasseemoo

Great Matthias! I don't know if wl_monitor has been implemented in all firmwares but, do you think manufacturers are trying to get monitor mode working more difficult? I've never implemented...