Lite3DP-Gen-2
Lite3DP-Gen-2 copied to clipboard
Lite3DP
MSLA 3D printer, ESP32 based, Arduino compatible
On my sdcard I have two directories with png files for printing two objects: ```sh $ ls -l insgesamt 144 drwxr-xr-x 2 cvogel cvogel 114688 3. Okt 15:47 rmote5 drwxr-xr-x...
On a chat this information will get lost sometimes. On the long run there should be some place to store them. Until that has been found we can store them...
The two built-in prints (keychain and touch stylus) are useful demos. The keychain shows a quick and detailed small print, I guess the touch stylus is really there to show...
I can only make the top cover to stay on the vat with a lot of trying and pushing it back on. [2024-09-30-130633.webm](https://github.com/user-attachments/assets/21945607-80e7-4c4a-9804-282022fd49cf)
I tried to print the touchpen and the result is this:  You can see "99" and "TO FINISH". I suppose that the image destined to the touch screen was...
If there are non-image data in the folder, Lite3DP seems to be unable to recognize it and, force the touchscreen image to be displayed on the UV panel.  The...
This point becomes too hot. It is so hot that it burns. is this correct or error? 
https://github.com/Lite3DP/Lite3DP-Gen-2/blob/main/Gen%202%20-%20Quick%20Start%20Guide/Gen%202%20-%20slicer%20configuration.pdf One of my first prints with supports didn't come out good, because the support beams weren't connected to the object.  Looking around...
The anodized black tunnel between bottom pcb (uv leds) and mainboard and the metallic-silver light funnel inside it scratch the bottom and main pcb. The protective layer of varnish above...
when doing the test print of the _keychain_ with the default parameters at some point the platform didn't move up further than some point and the printer made some mechanical...