ESP32-MINI-32-V1.3

ESP32-MINI-32-V1.3 copied to clipboard

Read lipo charging progress?

7

Is there a way how we can read the remaining battery level of a connected lipo battery / how much the battery is charged?

glowingkitty

Dimensional Drawing

4

hi, do y'all have a dimensional drawing available? specifically looking to locate the screw holes, USB, switch, and buttons, within the board.

ryankurte

External antenna

13

I am interested in using the external antenna u.fl connector. I can not find any information about how to make that work on the pcb. Can you please provide this...

jminix

theres nothing obvious i can see on the schematic, and afaik i should be able to map i2c sda/scl to these pins, but it doesnt work. the lines are being...

michaelmaclean83

JST connector Type

3

What's the jst type of battery connector? JST ZR?

alexodus

leds

2

What do the led stand for? Red = power green =??? bleu = ??? en what do the switch (close to the usb)

nonaak

the subject says it all. Labeling on the chip ist right - pinout picture is wrong!

nepozs

Eagle library

2

Hello guys, do you happen to have an eagle library?

beckmx

Where can I find the arduino drivers for this board?

6

Sorrry for the non-issue but I am trying to setup my arduino to use this ESP32 but I was no able to locate the hardware drivers on here. Do I...

dibs

Hi all, I have a pair of "TTGO T-Display V1.1 ESP32 - with 1.14 inch TFT Display" and a pair of "ESP32-CAM" and one "TTGO T7 Mini32 V1.3". All where...

nonaak