board

board copied to clipboard

Many improvements

5

* Fixes #62 * Fixes #58 * Improvements for #60 * Some work of #50 * Adds a bill of materials script that groups the DNP parts at the end...

spiccinini

The value shown in the pull down resistors for the jtag writes "10k %1" and its not needed. The PN used is a resistor at 1%, future tests will allow...

xcancerberox

Add JTAG connector

1

The JTAG is accessible on expose IOs connector. Will be more easy if it is a separated connector. Connector 2x5 din will be added with JTAGice MkII layout: 

xcancerberox

General check of silk screen. Version update on silk screen.

xcancerberox

Properly design coupled transmission lines

2

We are using coupled microstrips for the MegaBoard differential pairs (PCIe, USB, etc) and we are not taking in consideration the distance between the line and the groud plane at...

spiccinini

Add a way to disconnect the power to the board through GPIO

3

The idea is to provide a way to cut the power to the LibreRouter.

spiccinini

Missing holes in PCB

6

When we change the design from eagle to kicad some holes disappear.

xcancerberox

Missing Core Board?

2

Am I looking in the wrong place or is the kicad project for the core board missing? I only see mega_board in the designs folder.

stephen304

GPS module does not lock (signal issues)

5

The GPS module never locks to the GPS satellite signal when connected to the Mega Board. If the GPS module works ok if it is powered by an external source....

spiccinini

Complete BOM

7

The BOM is not fully defined. We will copy the components that are defined in the eagle design and define thous that are not.

xcancerberox