LeonHartStrife

Hi diggit, thanks for your help. I did follow the flashing guide but I forgot to save the hex files. I backup the bin files succefully and got four bin...

Here's what I got when I use the command "-F" and "-B 128kHz" If I don't put these commands, flashing won't start with the message : "target does not answer"...

Thanks for your help guys. =) Here are my fuse values : - hfuse.bin = C9 - lfuse.bin = 3F I tried to reflash with the saved flash.bin file, flashing...

> there is a good chance that your flash was "locked", you can check this by opening the flash.bin > in a hex editor: if you see a pattern: consecutively...

Here it is, hope this helps. https://youtu.be/o2qxhZ_fk9Y

Here's what I got : ``` C:\Users\LeonH\Desktop\AVRDUDE>avrdude.exe -c usbasp -p m32 -B 0.5 -Uhfuse:w:0xc5:m -Ulfuse:w:0x3f:m avrdude: set SCK frequency to 1500000 Hz avrdude error: cannot set sck period; please check...

@TBAMax Hi, thanks for your answer. Just tried to flash with your fuse values with no luck unfortunately.