Lech Perczak

Okay. I double checked with SSD1306 and with it blanking works just fine, regardless of display type setting (0/2). For SH1106 it doesn't - my guess is that SH1106 uses...

@dl9rdz ~~I figured it out, please see #328. Bumping the display library fixes the issue.~~ Edit: Well, I thought I had, but using shorter delay for testing caused a mistake....

@mmadela yeah, this would make total sense, as 300 seconds is over 255, the range of char - also - wouldn't unsigned type be better here? Would you mind opening...

Also works great on four of my C7v2 - no surprise at all, since hardware differs basically only by Wi-Fi card on those. A ton of great work!

After testing for a while, two out of four C7v2 exhibited RAM corruption issues and restarted up to a few times per day, so I had to revert them. There...

I would have to check exact HW revisions - I'll do so and post them here later today or tomorrow. I didn't overclock any of them. All ran exactly the...

I do have logs, thanks to remote syslog, I just need to dig them out. 3 devices work as routers, all serving >1 SSID over both bands, and one device...

That's my plan - I'll let them run for a while to double check - I don't recall any stability issues before installing u-boot_mod.

I attach the logs showing corrupted pages: [router_memory_errors.txt](https://github.com/pepe2k/u-boot_mod/files/6370888/router_memory_errors.txt) [ap_memory_errors.log](https://github.com/pepe2k/u-boot_mod/files/6370889/ap_memory_errors.log)

Both routers affected previously are running stable for 5 days now on stock U-boot, and the same OpenWrt build as previously. I plan to swap two devices, to get the...