OpenWRT-USB-Tethering icon indicating copy to clipboard operation
OpenWRT-USB-Tethering copied to clipboard

Seems to be configured ok but I get no IP traffic

Open juan9999 opened this issue 8 years ago • 0 comments

I am having an issue getting tethering to work using IOS 11. Everything seems to work, but I get not IP traffic.

Here is what I did.

1.I installed the openwrt-CC-USB_tethering_v5.1-tl-mr3020-v1-squashfs-factory.bin firmware (overwriting current config) 2. rebooted 3. connected ethernet to my computer, got assigned an IP address from router 4. turned off tethering on phone, connected phone to USB on router, trusted computer at message, turned on tethering (USB only) and blue bar turned on iPhone showing a connection 5. I logged into router and saw both TX and RX traffic to phone

When I ping say cnn.com, and the IP address gets resolved but I requests time out and I get a 100% packet lost. I can't browse any sites on my computer (even if I override DNS to 8.8.8.8)

I get the same behavior if I SSH and try the ping from the router.

Any ideas?

juan9999 avatar Oct 23 '17 09:10 juan9999