Layton

Ok, if I can't sovel the problem, I will try 2018.2

1400 *900 @60hz I think it works, because it displays rightly when running lowrisc v0.6

When I input command 'load', the debug terminal shows: Info : accepting 'gdb' connection on tcp/3333 Error: Timed out after 2s waiting for busy to go low (abstractcs=0x10001002). Increase the...

> 没用 我认为您最好的选择是安装Vivado 2018.2，rm -rf fpga / work-fpga并重新构建。 OK,thank you very much.

> It's not working. I think your best option is to install Vivado 2018.2, rm -rf fpga/work-fpga and re-build. I uninstall VIVADO 18.3 today, and using vivado 18.2 rebuild the...

I think if the pre-made binaries works , I should get the correct result if I program it using vivado. But it is doesn't work.

Thank you. I got right release, and ticked sdk when install 2018.2. Besides, I checked the report and found slack < 0.

Thank you. I got right release, and ticked sdk when install 2018.2. Besides, I checked the report and found slack < 0.

Ok, I will have a try.

When I am starting Debian, there are some error, and I can't connect to the Internet [FAILED] Failed to start Raise network interfaces. See 'systemctl status networking.service' for details. [...