SmartRC-CC1101-Driver-Lib

SmartRC-CC1101-Driver-Lib copied to clipboard

Finally got it working - setting custom pins - NodeMCU ESP32

3

I have NodeMCU ESP32. Using default pins introduced flash MD5 hash error so I chose custom pins. I recommend using **GPIO pins 16-33** because pins 0-15 have some special functions...

frspp

CC1101 (EO7-M11010) with Nodemcu esp32

1

I've been trying a lot of different connections and codes, but even if i have connected right the cc1101 to my esp32, the code doesnt seem to work. I mean,...

BeniIgle

Example "ProtocalAnalyzeDemo_cc1101" fails with exit status 1

1

``` exit status 1 Compilation error: 'class RCSwitch' has no member named 'getReceivedLevelInFirstTiming' ```

frspp

hello what exectly does the ELECHOUSE_cc1101.setModul(1); i want to use 2x CC1101 and i believe that this function will help what exectly does

gc9n

Two receivers with two CC1101 at the same time

31

Hello! Is it possible to use 2 CC1101 as 2 receivers working at the same time? Example: 1 CC1101 at 433mhz/1 CC1101 at 315mhz I've seen that you can change...

joelsernamoreno

sendData not working properly with OOK modulation

1

Expected data to be transmitted: "88ee88ee8888888e8888888e8" Output from Universal Radio Hacker  Code: ```cpp #include #include #define SCK_PIN 18 #define MISO_PIN 16 #define MOSI_PIN 19 #define SS_PIN 17 const int...

smolbun

Fix warnings found with "--warnings more"

1

Fix warnings found with "--warnings more": ``` /home/runner/Arduino/libraries/SmartRC-CC1101-Driver-Lib/ELECHOUSE_CC1101_SRC_DRV.cpp: In member function 'void ELECHOUSE_CC1101::Reset()': /home/runner/Arduino/libraries/SmartRC-CC1101-Driver-Lib/ELECHOUSE_CC1101_SRC_DRV.cpp:149:3: error: this 'while' clause does not guard... [-Werror=misleading-indentation] while(digitalRead(MISO_PIN)); ^~~~~ /home/runner/Arduino/libraries/SmartRC-CC1101-Driver-Lib/ELECHOUSE_CC1101_SRC_DRV.cpp:150:2: note: ...this statement, but the...

Noltari

Guru Meditation Error: Core 1

1

When pressing a button on a remote I get ``` CC1101: Connection OK CC1101: Rx mode Rssi: -65 LQI: 255 Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled....

frspp

ELECHOUSE_cc1101.SendData sends more bytes than expected

1

I am pretty new to this stuff so I hope I'm not making a stupid mistake. I used URH to receive a 868.3Mhz signal from a remote. I don't have...

bulburDE

Styling (heading are marked with # so it Github makes automatically table of contents) and some clarification based on what I learned the hard way.

frspp