option to specify Nx,Ny,Nz in ucdmesh object

[aowen87]

cqid: VisIt00008138cqsubmitter: Mark Millercqsubmitdate: 07/23/07 A ucd mesh (object written via DBPutUcdmesh call) is a 1D array of verticies. However, in many, many circumstances, a UCD mesh is the result of a structured collection of verticies. For example, mesh generators tend to operate this way. It would be good for Silo to accept options indicating the structured organization of the verticies. Compression would benefit from knowing this.

-----------------------REDMINE MIGRATION----------------------- This ticket was migrated from Redmine. As such, not all information was able to be captured in the transition. Below is a complete record of the original redmine ticket.

Ticket number: 316 Status: Pending Project: VisIt Tracker: Feature Priority: Normal Subject: option to specify Nx,Ny,Nz in ucdmesh object Assigned to: - Category: - Target version: - Author: Mark Miller Start: Due date: % Done: 0% Estimated time: Created: 08/04/2010 01:26 pm Updated: Likelihood: Severity: Found in version: Impact: 4 - High Expected Use: 3 - Occasional OS: All Support Group: DOE/ASC Description: cqid: VisIt00008138cqsubmitter: Mark Millercqsubmitdate: 07/23/07 A ucd mesh (object written via DBPutUcdmesh call) is a 1D array of verticies. However, in many, many circumstances, a UCD mesh is the result of a structured collection of verticies. For example, mesh generators tend to operate this way. It would be good for Silo to accept options indicating the structured organization of the verticies. Compression would benefit from knowing this.

Comments: