Kranzy

https://drive.google.com/file/d/11aJhwEV9gFtvIbM6sXoOA5lFJrsw94u4/view?usp=drivesdk https://drive.google.com/file/d/1HrrM5e3YLhkO3Vik55_4ZlnMCTbozym7/view?usp=drivesdk Looking at that link that’s my chlorinator so connecting A & B to A & B on the RS485 board?

Ok so finally got around to running some cable to the shed with the pool equipment. Im downloading the software now to put on my raspberry pi. Will be in...

Ok so couldn't get the software to run based on the readme file. `pi@raspberrypi:~/Documents/AquapureD-master/release $ sudo aquarited -d -c aquarited.conf sudo: aquarited: command not found` Copied the files to the...

Did a bit of research yesterday and changed the permissions of aquarited to be executable which then ran the script. `pi@raspberrypi:~/Documents/AquapureD-master $ sudo ./release/aquarited -d -c ./release/aquarited.conf Error: Open file...

The readme also states: > If you see an ACK after the probe, then we are in buisness. If not, and the RS485 port is setup correctly, then not much...

@sfeakes Another question for you. When this is up and running, will I still have my pump plugged into the Chlorinator or will I need to setup a relay to...

Ok so had a bit more of a play around with this. From the photo attached you can see the cat6 cable I used to run into the study, where...

Yeah I have been turning the chlorinator off then on a again after testing. Swapped A/B around with no difference in result. No response at all. Is there a way...

Cool, ill give that a shot. Should this code work using Ubuntu? To make it easier to test I created a Ubuntu live USB so I could test on my...

So I was able to install gcc in ubuntu running in windows but now I'm not sure that ill be able to access the usb->serial converter. Anyway I noticed when...