GoPro Control

GoPro Wifi controller inside the gopro

##How to:

1. Click here to download this repo
2. Unzip the GoProControl.zip file
3. If you want a temporary controller (you can delete the file and the controller will not show up)

• Copy index.html and autoexec.ash to the root your GoPro SD card (where DCIM and MISC are)
• Insert card back into the gopro, turn wifi on first and then turn on the gopro
• You will see that the red front LED stays bright, wait till the led turns off
• Then connect to the GoPro wifi with your device (computer/iPhone/raspberry pi/etc)
• Go to 10.5.5.9:8080/live in your browser, type your wifi password and start controlling

4. If you want a permanent controller (you can use the function Delete all from the gopro and the controller still will be there)

• Copy index.html to the root your GoPro SD card (where DCIM and MISC are)
• Copy tcp_tuner.sh to the MISC folder
• Go to gopro.com/update and download the update files for your GoPro
• Insert card back into the gopro
• Wait until the firmware update finishes

• After the firmware update:
• Then turn the wifi on
• Then connect to the GoPro wifi with your device (computer/iPhone/raspberry pi/etc)
• Go to 10.5.5.9:8080/live in your browser, type your wifi password and start controlling

#To Do: [X] One Autoexec.ash for all, remove extra steps

[ ] Fix version.txt iframe to parse the Version/Model to show only appropriate options

[ ] Preview (currently not possible with temporary controller, only with permanent controller)

[X] Responsive

[ ] Show camera modes, resolutions, etc...

~~[X] Make a dir in var/www or something that its not live or videos (both dirs are needed for the controller)~~

[X] Write a tcp_tuner.sh version.

#Demo:

###Mac:

###Ubuntu: