Koenkk
[New device support]: Moes Thermostat - _TZE204_lpedvtvr
Link
https://www.aliexpress.com/item/1005008017004760.html?src=google&pdp_npi=4%40dis%21GBP%2170.30%2130.29%21%21%21%21%21%40%2112000043377898982%21ppc%21%21%21&src=google&albch=shopping&acnt=494-037-6276&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&&albagn=888888&&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en1005008017004760&ds_e_product_merchant_id=680478118&ds_e_product_country=GB&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=17859500389&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gclid=CjwKCAiA9bq6BhAKEiwAH6bqoMyzGa27lfVQmlZ0p5iPXlytCHGEa1BQZJNKFUxZJDIftZi1K48KrBoCDSAQAvD_BwE
Database entry
{"id":41,"type":"Router","ieeeAddr":"0xa4c1383ebb899b92","nwkAddr":57155,"manufId":4417,"manufName":"_TZE204_lpedvtvr","powerSource":"Mains (single phase)","modelId":"TS0601","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":81,"inClusterList":[4,5,61184,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"65503":"\u0007\u000b�.i\u0007\u000b�.i","65506":56,"65508":0,"stackVersion":0,"dateCode":"","appVersion":74}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":74,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{},"lastSeen":1733251203681}
Zigbee2MQTT version
1.42.0-2
Comments
Good Evening, I am struggling to get a working converter for this new thermostat released by Moes. Am unable to locate anything similar to attempt to clone or Frankenstein to get basic functionality. I apologise, I don't seem to have the required skill set to get it running, it has provided no information under the 'Expose' Tab, Could you please assist.
External definition
const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE204_lpedvtvr',
description: 'Automatically generated definition',
extend: [],
meta: {},
};
module.exports = definition;
What does/doesn't work with the external definition?
the external definition only provides link quality, No further functionality.
I have still not had any luck so far trying to use an alternate configuration to get basic functionality from the thermostat.
My coding skills are very weak, and could not get this to work either. Here's all I could find out from the z2m debug log:
Temp set point: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,205],"type":"Buffer"},"datatype":2,"dp":50}],"seq":4352}' from endpoint 1 with groupID 0
Internal temp sensor reading: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,180],"type":"Buffer"},"datatype":2,"dp":16}],"seq":15616}' from endpoint 1 with groupID 0
External temp sensor reading: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,195],"type":"Buffer"},"datatype":2,"dp":109}],"seq":9984}' from endpoint 1 with groupID 0
Heating on: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":4,"dp":47}],"seq":26112}' from endpoint 1 with groupID
Heating off: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":4,"dp":47}],"seq":29184}' from endpoint 1 with groupID 0
ON/OFF
On: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":1,"dp":1}],"seq":23040}' from endpoint 1 with groupID 0
Off: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":1,"dp":1}],"seq":34048}' from endpoint 1 with groupID 0
WORK MODE
Manual: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":4,"dp":2}],"seq":60672}' from endpoint 1 with groupID 0
Temporary manual: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":4,"dp":2}],"seq":51968}' from endpoint 1 with groupID 0
Programming 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[2],"type":"Buffer"},"datatype":4,"dp":2}],"seq":46336}' from endpoint 1 with groupID 0
Eco: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[3],"type":"Buffer"},"datatype":4,"dp":2}],"seq":42240}' from endpoint 1 with groupID 0
SCREEN BRIGHTNESS
Standby brightness adjustment: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,66],"type":"Buffer"},"datatype":2,"dp":48}],"seq":4608}' from endpoint 1 with groupID 0
CHILD LOCK
Child lock on: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":1,"dp":39}],"seq":13312}' from endpoint 1 with groupID 0
Child lock off: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":1,"dp":39}],"seq":16128}' from endpoint 1 with groupID 0
SENSOR TYPE
In: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":4,"dp":32}],"seq":30208}' from endpoint 1 with groupID 0
AL: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":4,"dp":32}],"seq":35328}' from endpoint 1 with groupID 0
Ou: 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[2],"type":"Buffer"},"datatype":4,"dp":32}],"seq":37376}' from endpoint 1 with groupID 0
What the hell is this: 'Kitchen_Floor_Therm', type 'attributeReport', cluster 'genBasic', data '{"65503":"8\u000f .iF\u000f .iG\u000f .iL\u000f .i[\u000f .if\u000f .ig\u000f .ip\u000f .iv\u000f .iw\u000f .i"}' from endpoint 1 with groupID 0
This Is from startup:
'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,194],"type":"Buffer"},"datatype":2,"dp":34}],"seq":256}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,50],"type":"Buffer"},"datatype":2,"dp":18}],"seq":768}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'attributeReport', cluster 'genBasic', data '{"65506":56,"65508":1,"appVersion":74}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":1,"dp":115}],"seq":1024}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":4,"dp":47}],"seq":1280}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,250],"type":"Buffer"},"datatype":2,"dp":50}],"seq":1536}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandMcuVersionResponse', cluster 'manuSpecificTuya', data '{"seq":2048,"version":65}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,185],"type":"Buffer"},"datatype":2,"dp":16}],"seq":1792}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":1,"dp":1}],"seq":2048}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":4,"dp":2}],"seq":2304}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,250],"type":"Buffer"},"datatype":2,"dp":50}],"seq":2560}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":4,"dp":47}],"seq":2816}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[2],"type":"Buffer"},"datatype":4,"dp":32}],"seq":3072}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0],"type":"Buffer"},"datatype":1,"dp":39}],"seq":3328}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,68],"type":"Buffer"},"datatype":2,"dp":48}],"seq":3584}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[255,255,255,250],"type":"Buffer"},"datatype":2,"dp":101}],"seq":3840}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,5],"type":"Buffer"},"datatype":2,"dp":110}],"seq":4096}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,194],"type":"Buffer"},"datatype":2,"dp":111}],"seq":4352}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,0],"type":"Buffer"},"datatype":2,"dp":112}],"seq":4608}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,1,44],"type":"Buffer"},"datatype":2,"dp":113}],"seq":4864}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandMcuSyncTime', cluster 'manuSpecificTuya', data '{"payloadSize":20}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,185],"type":"Buffer"},"datatype":2,"dp":16}],"seq":5376}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,185],"type":"Buffer"},"datatype":2,"dp":109}],"seq":5632}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1],"type":"Buffer"},"datatype":4,"dp":114}],"seq":5888}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'read', cluster 'genTime', data '["localTime"]' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[1,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":102}],"seq":6144}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[2,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":103}],"seq":6400}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[3,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":104}],"seq":6656}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[4,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":105}],"seq":6912}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[5,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":106}],"seq":7168}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[6,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":107}],"seq":7424}' from endpoint 1 with groupID 0 'Kitchen_Floor_Therm', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[7,6,0,0,200,11,30,0,200,13,30,0,200,17,30,0,200],"type":"Buffer"},"datatype":0,"dp":108}],"seq":7680}' from endpoint 1 with groupID 0
I got it working enough to do the stuff I need to do in Node-Red. I'll post the converter file later tonight. Be warned that It is very untidy and contains stuff that does not work.
This converter is a wreck, but it will get basic functionality up and running. Use at own risk. moes_zht_sr.zip
Cheers!
That zip file you have dropped in flags as containing a virus/malware, so I shall play it safe by not opening it, I'm sure its probably just my system playing it safe however to play on the safe side, could you paste your converter directly in?
Sure! I have no idea what the "eco temperature" does. It doesn't seem to have any effect on the relay. It's just always on if in "eco" mode Dataponts that are not configured with a proper number ends with "NOT SET". Time is shown correctly for me, but not the day of the week, it's off by two days backwards?!?
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const definition = {
fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE204_lpedvtvr'}],
model: 'ZHT_SR',
vendor: 'Moes',
description: 'Thermostat for electric floor',
fromZigbee: [tuya.fz.datapoints],
toZigbee: [tuya.tz.datapoints],
onEvent: tuya.onEventSetTime,
configure: tuya.configureMagicPacket,
exposes: [
e.binary('child_lock', ea.STATE_SET, 'ON', 'OFF').withLabel('Child lock'),
e.binary('eco_mode', ea.STATE_SET, 'OFF', 'ON').withLabel('ECO mode NOT SET').withDescription('Default: Off'),
e
.numeric('eco_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(30)
.withValueStep(1)
.withUnit('°C')
.withLabel('Eco temperature')
.withDescription('Max temperature in ECO mode. Default: 20'),
e.binary('valve_state', ea.STATE, false, true).withLabel('Heating in process'),
e
.climate()
.withSystemMode(['off', 'heat'], ea.STATE_SET)
.withPreset(['manual', 'temp_manual', 'programming', 'eco'])
.withSetpoint('current_heating_setpoint', 5, 35, 0.5, ea.STATE_SET)
.withLocalTemperature(ea.STATE)
.withLocalTemperatureCalibration(-9, 9, 1, ea.STATE_SET)
.withDescription('Default: -3'),
e
.numeric('deadzone_temperature', ea.STATE_SET)
.withValueMin(1)
.withValueMax(5)
.withValueStep(1)
.withUnit('°C')
.withLabel('Deadzone temperature NOT SET')
.withDescription('Hysteresis. Default: 1'),
e.numeric('min_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(15)
.withValueStep(1)
.withUnit('°C')
.withLabel('Minimum temperature NOT SET')
.withDescription('Default: 5'),
e
.numeric('max_temperature', ea.STATE_SET)
.withValueMin(15)
.withValueMax(45)
.withValueStep(1)
.withUnit('°C')
.withLabel('Maximum temperature NOT SET')
.withDescription('Default: 35'),
e
.numeric('min_temperature_limit', ea.STATE_SET)
.withValueMin(0)
.withValueMax(10)
.withValueStep(1)
.withUnit('°C')
.withLabel('Low temperature protection NOT SET')
.withDescription('Default: 0'),
e
.numeric('max_temperature_limit', ea.STATE_SET)
.withValueMin(25)
.withValueMax(70)
.withValueStep(1)
.withUnit('°C')
.withLabel('High temperature protection NOT SET')
.withDescription('Default: 45'),
e.temperature_sensor_select(['IN', 'OU', 'AL']).withLabel('Sensor').withDescription('Choose which sensor to use. Default: AL'),
e
.numeric('external_temperature_input', ea.STATE)
.withLabel('Floor temperature')
.withUnit('°C')
.withDescription('Temperature from floor sensor'),
e
.numeric('brightness', ea.STATE_SET)
.withValueMin(0)
.withValueMax(8)
.withValueStep(1)
.withLabel('Screen brightness NOT SET')
.withDescription('0 - on for 10 seconds. Default: 6'),
e
.numeric('display_brightness', ea.STATE_SET)
.withValueMin(0)
.withValueMax(100)
.withValueStep(1)
.withLabel('Stanby screen brightness')
.withDescription('0-100%'),
e
.text('schedule_monday', ea.STATE_SET)
.withLabel('Schedule for monday TIMETABLES NOT TESTED')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e
.text('schedule_tuesday', ea.STATE_SET)
.withLabel('Schedule for tuesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e
.text('schedule_wednesday', ea.STATE_SET)
.withLabel('Schedule for wednesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e
.text('schedule_thursday', ea.STATE_SET)
.withLabel('Schedule for thursday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e
.text('schedule_friday', ea.STATE_SET)
.withLabel('Schedule for friday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e
.text('schedule_saturday', ea.STATE_SET)
.withLabel('Schedule for saturday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e
.text('schedule_sunday', ea.STATE_SET)
.withLabel('Schedule for sunday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.enum('factory_reset', ea.STATE_SET, ['factory reset']).withLabel('Factory reset NOT SET').withDescription('Reset all settings to factory ones'),
],
meta: {
tuyaDatapoints: [
[1, 'system_mode', tuya.valueConverterBasic.lookup({off: false, heat: true})],
[2, 'preset', tuya.valueConverterBasic.lookup({manual: tuya.enum(0), temp_manual: tuya.enum(1), programming: tuya.enum(2), eco: tuya.enum(3)})],
[50, 'current_heating_setpoint', tuya.valueConverter.divideBy10],
[19, 'max_temperature', tuya.valueConverter.divideBy10],
[16, 'local_temperature', tuya.valueConverter.divideBy10],
[26, 'min_temperature', tuya.valueConverter.divideBy10],
[27, 'local_temperature_calibration', tuya.valueConverter.raw],
[28, 'factory_reset', tuya.valueConverterBasic.lookup({factory_reset: true})],
[47, 'valve_state', tuya.valueConverter.trueFalseInvert],
[39, 'child_lock', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
[40, 'eco_mode', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
[32, 'sensor', tuya.valueConverterBasic.lookup({IN: tuya.enum(0), OU: tuya.enum(2), AL: tuya.enum(1)})],
[109, 'external_temperature_input', tuya.valueConverter.divideBy10],
[110, 'deadzone_temperature', tuya.valueConverter.raw],
[104, 'max_temperature_limit', tuya.valueConverter.divideBy10],
[102, 'schedule_monday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(1)],
[103, 'schedule_tuesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(2)],
[104, 'schedule_wednesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(3)],
[105, 'schedule_thursday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(4)],
[106, 'schedule_friday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(5)],
[107, 'schedule_saturday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(6)],
[108, 'schedule_sunday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(7)],
[114, 'min_temperature_limit', tuya.valueConverter.divideBy10],
[113, 'eco_temperature', tuya.valueConverter.divideBy10],
[115, 'brightness', tuya.valueConverter.raw],
[48, 'display_brightness', tuya.valueConverter.raw],
],
},
};
module.exports = definition;
Hi there!
Here are datapoints that I've got from Tuya hub:
{
"1": "Switch",
"2": "Work Mode",
"16": "Current temperature",
"18": "The lower limit of temperature",
"28": "Factory data reset",
"32": "Sensor selection",
"34": "Set temperature ceiling",
"39": "Child lock",
"47": "State of the valve",
"48": "Backlight brightness",
"50": "Set temperature",
"101": "Temp Calibration",
"102": "Week Program 13 1",
"103": "Week Program 13 2",
"104": "Week Program 13 3",
"105": "Week Program 13 4",
"106": "Week Program 13 5",
"107": "Week Program 13 6",
"108": "Week Program 13 7",
"109": "Floor temp.",
"110": "Dead zone temp.",
"111": "High protect temp.",
"112": "Low protection temp.",
"113": "Eco cool temp.",
"114": "Screen Time Set",
"115": "Rgblight"
}
...And here's mine version of external converter for this thermostat 😃
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const e = exposes.presets;
const ea = exposes.access;
const definition = {
zigbeeModel: ['TS0601'],
model: 'ZHT-SR-GB',
vendor: 'Moes',
description: 'Smart knob thermostat',
fromZigbee: [tuya.fz.datapoints],
toZigbee: [tuya.tz.datapoints],
exposes: [
e.binary('child_lock', ea.STATE_SET, 'ON', 'OFF').withLabel('Child lock'),
e.binary('rgb_backlight', ea.STATE_SET, 'OFF', 'ON').withLabel('RGB backlight').withDescription('Default: Off'),
e.numeric('eco_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(30)
.withValueStep(1)
.withUnit('°C')
.withDescription('Max temperature in ECO mode. Default: 20'),
e.binary('valve_state', ea.STATE, false, true).withLabel('Heating in process'),
e.climate()
.withSystemMode(['off', 'heat'], ea.STATE_SET)
.withPreset(['manual', 'temporary manual', 'schedule', 'eco'])
.withSetpoint('current_heating_setpoint', 5, 35, 0.5, ea.STATE_SET)
.withLocalTemperature(ea.STATE)
.withLocalTemperatureCalibration(-9, 9, 0.1, ea.STATE_SET)
.withDescription('Default: -3'),
e.numeric('deadzone_temperature', ea.STATE_SET)
.withValueMin(1)
.withValueMax(5)
.withValueStep(1)
.withUnit('°C')
.withDescription('Hysteresis. Default: 1'),
e.numeric('min_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(15)
.withValueStep(1)
.withUnit('°C')
.withDescription('Default: 5'),
e.numeric('max_temperature', ea.STATE_SET)
.withValueMin(15)
.withValueMax(45)
.withValueStep(1)
.withUnit('°C')
.withDescription('Default: 35'),
e.numeric('min_temperature_limit', ea.STATE_SET)
.withValueMin(0)
.withValueMax(10)
.withValueStep(1)
.withUnit('°C')
.withLabel('Low temperature protection')
.withDescription('Default: 0'),
e.numeric('lower_limit_of_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(15)
.withValueStep(1)
.withUnit('°C')
.withLabel('The lower limit of temperature')
.withDescription('Default: 5'),
e.enum('sensor', ea.STATE_SET, ['IN', 'OU', 'AL']).withLabel('Sensor')
.withDescription('Choose which sensor to use. Default: AL'),
e.numeric('external_temperature_input', ea.STATE)
.withLabel('Floor temperature')
.withUnit('°C')
.withDescription('Temperature from floor sensor'),
e.numeric('brightness', ea.STATE_SET)
.withValueMin(0)
.withValueMax(100)
.withValueStep(1)
.withLabel('Backlight brightness')
.withDescription('Backlight brightness in %'),
e.text('schedule_monday', ea.STATE_SET)
.withLabel('Schedule for monday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_tuesday', ea.STATE_SET)
.withLabel('Schedule for tuesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_wednesday', ea.STATE_SET)
.withLabel('Schedule for wednesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_thursday', ea.STATE_SET)
.withLabel('Schedule for thursday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_friday', ea.STATE_SET)
.withLabel('Schedule for friday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_saturday', ea.STATE_SET)
.withLabel('Schedule for saturday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_sunday', ea.STATE_SET)
.withLabel('Schedule for sunday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.enum('factory_reset', ea.STATE_SET, ['factory_reset'])
.withLabel('Factory reset')
.withDescription('Reset all settings to factory ones'),
e.enum('screen_time_set', ea.STATE_SET, ['off', '10s', '30s', '60s'])
.withLabel('Screen Timeout')
.withDescription('Set screen timeout duration. Default: off'),
],
meta: {
tuyaDatapoints: [
[1, 'system_mode', tuya.valueConverterBasic.lookup({off: false, heat: true})],
[2, 'preset', tuya.valueConverterBasic.lookup({manual: tuya.enum(0), 'temporary manual': tuya.enum(1), schedule: tuya.enum(2), eco: tuya.enum(3)})],
[16, 'local_temperature', tuya.valueConverter.divideBy10],
[18, 'lower_limit_of_temperature', tuya.valueConverter.divideBy10],
[28, 'factory_reset', tuya.valueConverterBasic.lookup({factory_reset: true})],
[32, 'sensor', tuya.valueConverterBasic.lookup({IN: tuya.enum(0), OU: tuya.enum(2), AL: tuya.enum(1)})],
[34, 'max_temperature', tuya.valueConverter.divideBy10],
[39, 'child_lock', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
[47, 'valve_state', tuya.valueConverter.trueFalseInvert],
[48, 'brightness', tuya.valueConverter.raw],
[50, 'current_heating_setpoint', tuya.valueConverter.divideBy10],
[101, 'local_temperature_calibration', tuya.valueConverter.divideBy10],
[102, 'schedule_monday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(1)],
[103, 'schedule_tuesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(2)],
[104, 'schedule_wednesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(3)],
[105, 'schedule_thursday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(4)],
[106, 'schedule_friday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(5)],
[107, 'schedule_saturday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(6)],
[108, 'schedule_sunday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(7)],
[109, 'external_temperature_input', tuya.valueConverter.divideBy10],
[110, 'deadzone_temperature', tuya.valueConverter.raw],
[111, 'max_temperature_limit', tuya.valueConverter.divideBy10],
[112, 'min_temperature_limit', tuya.valueConverter.divideBy10],
[113, 'eco_temperature', tuya.valueConverter.divideBy10],
[114, 'screen_time_set', tuya.valueConverterBasic.lookup({
off: tuya.enum(0),
'10s': tuya.enum(1),
'30s': tuya.enum(2),
'60s': tuya.enum(3)
})],
[115, 'rgb_backlight', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
],
},
onEvent: tuya.onEventSetLocalTime,
};
module.exports = definition;
Nice.
I have no Tuya bridge, so thanks for the help!
...and I think most of the temp tings are .withValueStep(0.5)
Can't seem to get the "deadzone_temperature" and "local_temperature_calibration" to work properly. Might have something to do with factors?
Not sure, but seems that calibration works now :)
Here is updated converter (fixed default values, min/max values, etc.), can you please try it?
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const e = exposes.presets;
const ea = exposes.access;
const definition = {
zigbeeModel: ['TS0601'],
model: 'ZHT-SR-GB',
vendor: 'Moes',
description: 'Smart knob thermostat',
fromZigbee: [tuya.fz.datapoints],
toZigbee: [tuya.tz.datapoints],
exposes: [
e.binary('child_lock', ea.STATE_SET, 'ON', 'OFF').withLabel('Child lock'),
e.binary('rgb_backlight', ea.STATE_SET, 'ON', 'OFF').withLabel('RGB backlight').withDescription('Default: On'),
e.numeric('eco_temperature', ea.STATE_SET)
.withValueMin(10)
.withValueMax(30)
.withValueStep(1)
.withUnit('°C')
.withDescription('Max temperature in ECO mode. Default: 30'),
e.binary('valve_state', ea.STATE, false, true).withLabel('Heating in process'),
e.climate()
.withSystemMode(['off', 'heat'], ea.STATE_SET)
.withPreset(['manual', 'temporary manual', 'schedule', 'eco'])
.withSetpoint('current_heating_setpoint', 5, 45, 0.5, ea.STATE_SET)
.withLocalTemperature(ea.STATE)
.withLocalTemperatureCalibration(-10, 10, 1, ea.STATE_SET)
.withDescription('Default: 22'),
e.numeric('deadzone_temperature', ea.STATE_SET)
.withValueMin(0.5)
.withValueMax(5)
.withValueStep(0.5)
.withLabel('Dead zone temperature')
.withUnit('°C')
.withDescription('Default: 0.5'),
e.numeric('max_temperature', ea.STATE_SET)
.withValueMin(35)
.withValueMax(45)
.withValueStep(1)
.withLabel('Set temperature ceiling')
.withUnit('°C')
.withDescription('Default: 45'),
e.numeric('min_temperature_limit', ea.STATE_SET)
.withValueMin(0)
.withValueMax(10)
.withValueStep(1)
.withUnit('°C')
.withLabel('Low temperature protection')
.withDescription('Default: 0'),
e.numeric('max_temperature_limit', ea.STATE_SET)
.withValueMin(10)
.withValueMax(70)
.withValueStep(1)
.withLabel('High temperature protection')
.withUnit('°C')
.withDescription('Default: 45'),
e.numeric('lower_limit_of_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(15)
.withValueStep(1)
.withUnit('°C')
.withLabel('The lower limit of temperature')
.withDescription('Default: 5'),
e.enum('sensor', ea.STATE_SET, ['IN', 'OU', 'AL']).withLabel('Sensor')
.withDescription('Choose which sensor to use. Default: AL'),
e.numeric('external_temperature_input', ea.STATE)
.withLabel('Floor temperature')
.withUnit('°C')
.withDescription('Temperature from floor sensor'),
e.numeric('brightness', ea.STATE_SET)
.withValueMin(0)
.withValueMax(100)
.withValueStep(1)
.withLabel('Backlight brightness')
.withUnit('%')
.withDescription('Backlight brightness in %. Default: 5%'),
e.text('schedule_monday', ea.STATE_SET)
.withLabel('Schedule for monday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_tuesday', ea.STATE_SET)
.withLabel('Schedule for tuesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_wednesday', ea.STATE_SET)
.withLabel('Schedule for wednesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_thursday', ea.STATE_SET)
.withLabel('Schedule for thursday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_friday', ea.STATE_SET)
.withLabel('Schedule for friday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_saturday', ea.STATE_SET)
.withLabel('Schedule for saturday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_sunday', ea.STATE_SET)
.withLabel('Schedule for sunday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.enum('factory_reset', ea.STATE_SET, ['factory_reset'])
.withLabel('Factory reset')
.withDescription('Reset all settings to factory ones'),
e.enum('screen_time_set', ea.STATE_SET, ['10s', '20s', '30s', '40s', '50s', '60s'])
.withLabel('Screen Timeout')
.withDescription('Set screen timeout duration. Default: 20s'),
],
meta: {
tuyaDatapoints: [
[1, 'system_mode', tuya.valueConverterBasic.lookup({off: false, heat: true})],
[2, 'preset', tuya.valueConverterBasic.lookup({manual: tuya.enum(0), 'temporary manual': tuya.enum(1), schedule: tuya.enum(2), eco: tuya.enum(3)})],
[16, 'local_temperature', tuya.valueConverter.divideBy10],
[18, 'lower_limit_of_temperature', tuya.valueConverter.divideBy10],
[28, 'factory_reset', tuya.valueConverterBasic.lookup({factory_reset: true})],
[32, 'sensor', tuya.valueConverterBasic.lookup({IN: tuya.enum(0), OU: tuya.enum(2), AL: tuya.enum(1)})],
[34, 'max_temperature', tuya.valueConverter.divideBy10],
[39, 'child_lock', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
[47, 'valve_state', tuya.valueConverter.trueFalseInvert],
[48, 'brightness', tuya.valueConverter.raw],
[50, 'current_heating_setpoint', tuya.valueConverter.divideBy10],
[101, 'local_temperature_calibration', tuya.valueConverter.localTemperatureCalibration],
[102, 'schedule_monday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(1)],
[103, 'schedule_tuesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(2)],
[104, 'schedule_wednesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(3)],
[105, 'schedule_thursday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(4)],
[106, 'schedule_friday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(5)],
[107, 'schedule_saturday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(6)],
[108, 'schedule_sunday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(7)],
[109, 'external_temperature_input', tuya.valueConverter.divideBy10],
[110, 'deadzone_temperature', tuya.valueConverter.raw],
[111, 'max_temperature_limit', tuya.valueConverter.divideBy10],
[112, 'min_temperature_limit', tuya.valueConverter.divideBy10],
[113, 'eco_temperature', tuya.valueConverter.divideBy10],
[114, 'screen_time_set', tuya.valueConverterBasic.lookup({
'10s': tuya.enum(0),
'20s': tuya.enum(1),
'30s': tuya.enum(2),
'40s': tuya.enum(3),
'50s': tuya.enum(4),
'60s': tuya.enum(5)
})],
[115, 'rgb_backlight', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
],
},
onEvent: tuya.onEventSetLocalTime,
};
module.exports = definition;
I tried the code and it worked for me anyway.
Some things I changed to my way of using a floor thermostat. Limits have been change. Don't know what the real device limits are, but the ones in the code below works. Dead zone (hysteresis) needs to be multiplied by 10 to work. I have no idea how to do it. Can't find a tuya.valueConverter to do this.
...and I don't know why the code does not show up here properly. Sorry.
const exposes = require('zigbee-herdsman-converters/lib/exposes'); const tuya = require('zigbee-herdsman-converters/lib/tuya'); const e = exposes.presets; const ea = exposes.access;
const definition = { zigbeeModel: ['TS0601'], model: 'ZHT-SR-GB', vendor: 'Moes', description: 'Smart knob thermostat', fromZigbee: [tuya.fz.datapoints], toZigbee: [tuya.tz.datapoints], exposes: [ e.binary('child_lock', ea.STATE_SET, 'ON', 'OFF').withLabel('Child lock'),
e.binary('rgb_backlight', ea.STATE_SET, 'ON', 'OFF').withLabel('Knob light').withDescription('Default: On'),
e.numeric('eco_temperature', ea.STATE_SET)
.withValueMin(10)
.withValueMax(30)
.withValueStep(0.5)
.withUnit('°C')
.withDescription('Max temperature in ECO mode. Default: 30'),
e.binary('valve_state', ea.STATE, false, true).withLabel('Heating in progress'),
e.climate()
.withSystemMode(['off', 'heat'], ea.STATE_SET)
.withPreset(['manual', 'temporary manual', 'schedule', 'eco'])
.withSetpoint('current_heating_setpoint', 5, 45, 0.5, ea.STATE_SET)
.withLocalTemperature(ea.STATE)
.withLocalTemperatureCalibration(-10, 10, 1, ea.STATE_SET)
.withDescription('Default: 22'),
e.numeric('deadzone_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(50)
.withValueStep(5)
.withLabel('Dead zone temperature')
.withUnit('°C')
.withDescription('Default: 0.5'),
e.numeric('max_temperature', ea.STATE_SET)
.withValueMin(20)
.withValueMax(45)
.withValueStep(0.5)
.withLabel('Maximum temperature setpont on device')
.withUnit('°C')
.withDescription('Default: 45'),
e.numeric('lower_limit_of_temperature', ea.STATE_SET)
.withValueMin(5)
.withValueMax(20)
.withValueStep(0.5)
.withUnit('°C')
.withLabel('Minimum temperature setpont on device')
.withDescription('Default: 5'),
e.numeric('external_temperature_input', ea.STATE)
.withLabel('Floor temperature')
.withUnit('°C')
.withDescription('Current temperature measured from floor sensor'),
e.numeric('max_temperature_limit', ea.STATE_SET)
.withValueMin(25)
.withValueMax(45)
.withValueStep(0.5)
.withLabel('Maximum floor temperature')
.withUnit('°C')
.withDescription('Default: 45'),
e.numeric('min_temperature_limit', ea.STATE_SET)
.withValueMin(0)
.withValueMax(25)
.withValueStep(0.5)
.withUnit('°C')
.withLabel('Minimum floor temperature')
.withDescription('Default: 0'),
e.enum('sensor', ea.STATE_SET, ['IN', 'OU', 'AL']).withLabel('Sensor')
.withDescription('Choose which sensor to use. Default: AL'),
e.numeric('brightness', ea.STATE_SET)
.withValueMin(0)
.withValueMax(100)
.withValueStep(1)
.withLabel('Display stanby brightness')
.withUnit('%')
.withDescription('Display brightness in %. Default: 5%'),
e.text('schedule_monday', ea.STATE_SET)
.withLabel('Schedule for monday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_tuesday', ea.STATE_SET)
.withLabel('Schedule for tuesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_wednesday', ea.STATE_SET)
.withLabel('Schedule for wednesday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_thursday', ea.STATE_SET)
.withLabel('Schedule for thursday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_friday', ea.STATE_SET)
.withLabel('Schedule for friday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_saturday', ea.STATE_SET)
.withLabel('Schedule for saturday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.text('schedule_sunday', ea.STATE_SET)
.withLabel('Schedule for sunday')
.withDescription('Default: 06:00/20.0 11:30/20.0 13:30/20.0 17:30/20.0'),
e.enum('factory_reset', ea.STATE_SET, ['factory_reset'])
.withLabel('Factory reset')
.withDescription('Reset all settings to factory ones'),
e.enum('screen_time_set', ea.STATE_SET, ['10s', '20s', '30s', '40s', '50s', '60s'])
.withLabel('Screen Timeout')
.withDescription('Set screen timeout duration. Default: 20s'),
],
meta: {
tuyaDatapoints: [
[1, 'system_mode', tuya.valueConverterBasic.lookup({off: false, heat: true})],
[2, 'preset', tuya.valueConverterBasic.lookup({manual: tuya.enum(0), 'temporary manual': tuya.enum(1), schedule: tuya.enum(2), eco: tuya.enum(3)})],
[16, 'local_temperature', tuya.valueConverter.divideBy10],
[18, 'lower_limit_of_temperature', tuya.valueConverter.divideBy10],
[28, 'factory_reset', tuya.valueConverterBasic.lookup({factory_reset: true})],
[32, 'sensor', tuya.valueConverterBasic.lookup({IN: tuya.enum(0), OU: tuya.enum(2), AL: tuya.enum(1)})],
[34, 'max_temperature', tuya.valueConverter.divideBy10],
[39, 'child_lock', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
[47, 'valve_state', tuya.valueConverter.trueFalseInvert],
[48, 'brightness', tuya.valueConverter.raw],
[50, 'current_heating_setpoint', tuya.valueConverter.divideBy10],
[101, 'local_temperature_calibration', tuya.valueConverter.localTemperatureCalibration],
[102, 'schedule_monday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(1)],
[103, 'schedule_tuesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(2)],
[104, 'schedule_wednesday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(3)],
[105, 'schedule_thursday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(4)],
[106, 'schedule_friday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(5)],
[107, 'schedule_saturday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(6)],
[108, 'schedule_sunday', tuya.valueConverter.thermostatScheduleDayMultiDPWithDayNumber(7)],
[109, 'external_temperature_input', tuya.valueConverter.divideBy10],
[110, 'deadzone_temperature', tuya.valueConverter.raw],
[111, 'max_temperature_limit', tuya.valueConverter.divideBy10],
[112, 'min_temperature_limit', tuya.valueConverter.divideBy10],
[113, 'eco_temperature', tuya.valueConverter.divideBy10],
[114, 'screen_time_set', tuya.valueConverterBasic.lookup({
'10s': tuya.enum(0),
'20s': tuya.enum(1),
'30s': tuya.enum(2),
'40s': tuya.enum(3),
'50s': tuya.enum(4),
'60s': tuya.enum(5)
})],
[115, 'rgb_backlight', tuya.valueConverterBasic.lookup({ON: true, OFF: false})],
],
},
onEvent: tuya.onEventSetLocalTime,
};
module.exports = definition;
Why is it doing this? Is there a way to set it to Celsius?
So a little more information, set the device up and it works well the problem is when I try to change the temperature on a thermostat card in home assistant it does this or goes extreme negative. The problem seems to come from home assistant converting to °F. If I change the temperature on Z2M it works fine because it’s in °C. Any and all help would be appreciated!
@szheliab So seems like the code work right? Can this be added to Zigbee2MQTT so we don't have to use it as "External" converter?
Regards
@ETE-Design
@szheliab So seems like the code work right? Can this be added to Zigbee2MQTT so we don't have to use it as "External" converter?
Regards
Hi Unfortunately, I don't have this device installed :(
If you can confirm that my converter works correctly then I can prepare PR to add this device to supported list
everything works
Everything works as long as the global system is set to °C but if you use global settings as °F the temp will not change and will be a very erratic number. Anyway to fix this?
@szheliab So seems like the code work right? Can this be added to Zigbee2MQTT so we don't have to use it as "External" converter? Regards
Hi Unfortunately, I don't have this device installed :(
If you can confirm that my converter works correctly then I can prepare PR to add this device to supported list
Same problem - Have ordered it but not received it yet... So can't test it for now :-(
Where do I paste this code to make it work? How long does it normally take for zigbee2mqtt to add these as standard? I'm wondering if it's worth me just waiting for the update that carries the support for the thermostat? Thanks.
Where do I paste this code to make it work?
@Johnwhutchinson Assuming you're running z2m with Home Assistant, just paste the code into a new file (e.g. floorheating.js) and drop it in /homeassistant/zigbee2mqtt/. You may need to pair the device again.
If you can confirm that my converter works correctly then I can prepare PR to add this device to supported list
@szheliab I can also confirm that all the obvious features are working correctly. I've only tried with the default units in Celsius though, so I can't rule out this potential issue with Fahrenheit: https://github.com/Koenkk/zigbee2mqtt/issues/25038#issuecomment-2602324026
Hi, ZigBee rookie here! I have home assistant with ZHA integration. Is this converter usable in zone way with ZHA?
Thanks and sorry if the question is silly!
Hi, ZigBee rookie here! I have home assistant with ZHA integration. Is this converter usable in zone way with ZHA?
Thanks and sorry if the question is silly!
Sorry @nicmela, zigbee2mqtt code can't plug in to ZHA. Though someone with experience writing ZHA device 'quirks', or a lot of time to learn the ... quirks ... of writing quirks could likely make something for ZHA based on the information contained within this code.