zigbee2mqtt
zigbee2mqtt copied to clipboard
Koenkk
z2m: Failed to call 'OnEvent' 'stop' (TypeError: Cannot read properties of undefined (reading 'getDevices')
What happened?
I have been using another Zigbee USB Dongle (ThirdReality) and I tried switching to a smlight SL-ZB-06 Zigbee adapter. When I try to start Zigbee2MQTT in HAOS, I get this:
[10:37:06] INFO: Preparing to start...
[10:37:08] INFO: Socat not enabled
[10:37:15] INFO: Starting Zigbee2MQTT...
[2024-05-07 10:37:22] info: z2m: Logging to console, file (filename: log.log)
[2024-05-07 10:37:31] error: z2m: Failed to call 'OnEvent' 'stop' (TypeError: Cannot read properties of undefined (reading 'getDevices')
at Zigbee.devices (/app/lib/zigbee.ts:329:30)
at OnEvent.stop (/app/lib/extension/onEvent.ts:37:42)
at Controller.callExtensions (/app/lib/controller.ts:336:42)
at Controller.stop (/app/lib/controller.ts:208:9)
at stop (/app/index.js:111:5)
at process.handleQuit (/app/index.js:117:9))
TypeError: Cannot read properties of undefined (reading 'getDeviceByIeeeAddr')
at Zigbee.resolveDevice (/app/lib/zigbee.ts:250:42)
at Zigbee.resolveEntity (/app/lib/zigbee.ts:277:45)
at /app/lib/state.ts:36:66
at Array.filter (<anonymous>)
at State.stop (/app/lib/state.ts:36:14)
at Controller.stop (/app/lib/controller.ts:212:20)
at stop (/app/index.js:111:5)
at process.handleQuit (/app/index.js:117:9)
I'm running the latest firmware on the SL-ZB06 and can access its web interface fine at its URL. The config for this adapter is:
data_path: /config/zigbee2mqtt
socat:
enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: "-d -d"
log: false
mqtt: {}
serial:
port: tcp://192.168.0.127:6638
baudrate: 115200
Note: the SL-ZB06 documentation says to use:
adapter: Unknown
and I've tried that and:
adapter: none
And in either case, I get errors during the saving of the configuration indicative of the config's not matching the required schema.
Sometimes, when I try to restart zigbee2mqtt, the output looks a bit different:
[10:45:14] INFO: Preparing to start...
[10:45:16] INFO: Socat not enabled
[10:45:23] INFO: Starting Zigbee2MQTT...
[2024-05-07 10:45:31] info: z2m: Logging to console, file (filename: log.log)
[2024-05-07 10:45:41] info: z2m: Starting Zigbee2MQTT version 1.37.0 (commit #unknown)
[2024-05-07 10:45:41] info: z2m: Starting zigbee-herdsman (0.45.0)
[2024-05-07 10:45:43] info: zh:zigate: Connected to ZiGate adapter successfully.
[2024-05-07 10:45:48] error: z2m: Error while starting zigbee-herdsman
[2024-05-07 10:45:48] error: z2m: Failed to start zigbee
[2024-05-07 10:45:48] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
[2024-05-07 10:45:48] error: z2m: Exiting...
[2024-05-07 10:45:48] error: z2m: Error: failed to connect to zigate adapter [object Object] after 5000ms
at ZiGateAdapter.start (/app/node_modules/zigbee-herdsman/src/adapter/zigate/adapter/zigateAdapter.ts:95:19)
at runNextTicks (node:internal/process/task_queues:60:5)
at listOnTimeout (node:internal/timers:538:9)
at processTimers (node:internal/timers:512:7)
at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:124:29)
at Zigbee.start (/app/lib/zigbee.ts:62:27)
at Controller.start (/app/lib/controller.ts:108:27)
at start (/app/index.js:107:5)
Note the reference to ZIGate here. Is the SL-ZB06 really using a zigate adapter? Or are there some vestiges from when I was using the other (ZiGate, ThirdReality USB adapter)?
What did you expect to happen?
I expected zigbee2mqtt to come up just fine.
How to reproduce it (minimal and precise)
Update zigbee2mqtt configuration as specified above, and restart zigbee2mqtt.
Zigbee2MQTT version
1.37.0-1
Adapter firmware version
can't access frontend
Adapter
smlight SLZB-06
Setup
HAOS on RPI3
Debug log
No response
I read somewhere that perhaps the ezsp driver is the one to use with the SLZB-06. When I try that, I get this error:
[11:00:09] INFO: Preparing to start...
[11:00:11] INFO: Socat not enabled
[11:00:18] INFO: Starting Zigbee2MQTT...
[2024-05-07 11:00:24] info: z2m: Logging to console, file (filename: log.log)
[2024-05-07 11:00:34] info: z2m: Starting Zigbee2MQTT version 1.37.0 (commit #unknown)
[2024-05-07 11:00:34] info: z2m: Starting zigbee-herdsman (0.45.0)
[2024-05-07 11:00:36] warning: zh:ezsp: Deprecated driver 'ezsp' currently in use, 'ember' will become the officially supported EmberZNet driver in next release. If using Zigbee2MQTT see https://github.com/Koenkk/zigbee2mqtt/discussions/21462
[2024-05-07 11:00:46] error: zh:ezsp:uart: --> Error: Error: {"sequence":-1} after 10000ms
Error: Failure to connect
at SerialDriver.resetForReconnect (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:347:19)
at SerialDriver.emit (node:events:517:28)
at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:348:22
at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20)
at Socket.<anonymous> (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:154:17)
```
So that appears not to be right either.
And trying the ember adapter gives this:
[11:11:19] INFO: Preparing to start...
[11:11:21] INFO: Socat not enabled
[11:11:28] INFO: Starting Zigbee2MQTT...
[2024-05-07 11:11:35] info: z2m: Logging to console, file (filename: log.log)
[2024-05-07 11:11:44] info: z2m: Starting Zigbee2MQTT version 1.37.0 (commit #unknown)
[2024-05-07 11:11:44] info: z2m: Starting zigbee-herdsman (0.45.0)
[2024-05-07 11:11:45] info: zh:ember: ======== Ember Adapter Starting ========
[2024-05-07 11:11:45] info: zh:ember:ezsp: ======== EZSP starting ========
[2024-05-07 11:11:45] info: zh:ember:uart:ash: ======== ASH NCP reset ========
[2024-05-07 11:11:45] info: zh:ember:uart:ash: Socket ready
[2024-05-07 11:11:45] info: zh:ember:uart:ash: ======== ASH starting ========
[2024-05-07 11:11:47] info: zh:ember:uart:ash: ======== ASH NCP reset ========
[2024-05-07 11:11:47] info: zh:ember:uart:ash: ======== ASH starting ========
[2024-05-07 11:11:50] info: zh:ember:uart:ash: ======== ASH NCP reset ========
[2024-05-07 11:11:50] info: zh:ember:uart:ash: ======== ASH starting ========
[2024-05-07 11:11:52] info: zh:ember:uart:ash: ======== ASH NCP reset ========
[2024-05-07 11:11:52] info: zh:ember:uart:ash: ======== ASH starting ========
[2024-05-07 11:11:55] info: zh:ember:uart:ash: ======== ASH NCP reset ========
[2024-05-07 11:11:55] info: zh:ember:uart:ash: ======== ASH starting ========
[2024-05-07 11:11:57] error: z2m: Error while starting zigbee-herdsman
[2024-05-07 11:11:57] error: z2m: Failed to start zigbee
[2024-05-07 11:11:57] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
[2024-05-07 11:11:57] error: z2m: Exiting...
[2024-05-07 11:11:58] error: z2m: Error: Failed to start EZSP layer with status=HOST_FATAL_ERROR.
at EmberAdapter.initEzsp (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:798:19)
at EmberAdapter.start (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:2660:24)
at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:124:29)
at Zigbee.start (/app/lib/zigbee.ts:62:27)
at Controller.start (/app/lib/controller.ts:108:27)
at start (/app/index.js:107:5)
@eswenson1 please take a look about the guide below if you want to try "ember" https://github.com/Koenkk/zigbee2mqtt/discussions/21462
If you are using SL-ZB-06, it will not be compatible with ember because SL-ZB-06 is CC2652 based zigbee radio.
Thanks. Didn’t realize that. In any case, see the above errors when I use the ezsp driver.