Koenkk
Smart Zigbee energy meter 80A din rail (DAC2161C) by MatSee Plus
What happened?
After latest z2m update this device refresh data after 12 or more minutes. On previous version the refresh was a 2,5 minute and I was hoping for a solution to speed up this process.
What did you expect to happen?
As this product is quite nice, a new converter or OTA firmware update it will be much appreciated
How to reproduce it (minimal and precise)
I think that from latest z2m update this delay is based on device parameters change, as if the Power is almost constant the z2m doesn't listen and doesn't update the status.
Zigbee2MQTT version
1.35.0-1
Adapter firmware version
2023.12.4
Adapter
MatSee Plus DAC2161C _TZE204_lsanae15
Debug log
Zigbee2MQTT:debug 2024-01-02 14:34:24: Received Zigbee message from 'Main Fuse', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[8,239,0,11,102,0,2,11],"type":"Buffer"},"datatype":0,"dp":6}],"seq":58372}' from endpoint 1 with groupID 0 Zigbee2MQTT:info 2024-01-02 14:34:24: MQTT publish: topic 'zigbee2mqtt/Main Fuse', payload '{"clear_fault":"OFF","current":2.92,"energy":1284.79,"fault":null,"linkquality":168,"meter_id":"23290885","power":523,"state":"ON","threshold_1":"over_voltage_threshold","threshold_1_protection":"ON","threshold_1_value":270,"threshold_2":null,"threshold_2_protection":null,"threshold_2_value":0,"voltage":228.7}' Zigbee2MQTT:debug 2024-01-02 14:34:24: Received Zigbee message from 'Main Fuse', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,1,245,225],"type":"Buffer"},"datatype":2,"dp":1}],"seq":58628}' from endpoint 1 with groupID 0 Zigbee2MQTT:info 2024-01-02 14:34:24: MQTT publish: topic 'zigbee2mqtt/Main Fuse', payload '{"clear_fault":"OFF","current":2.92,"energy":1284.81,"fault":null,"linkquality":172,"meter_id":"23290885","power":523,"state":"ON","threshold_1":"over_voltage_threshold","threshold_1_protection":"ON","threshold_1_value":270,"threshold_2":null,"threshold_2_protection":null,"threshold_2_value":0,"voltage":228.7}'
