zigbee2mqtt
zigbee2mqtt copied to clipboard
Koenkk
TuYa TS0012_switch_module turns on both loads when only one switch is pressed
What happened?
TuYa TS0012_switch_module 2 gang switch module - (without neutral) When I click on one of the two switches on the dashboard (State Left or State Right) that refer to that switch, both loads turn on, not just one. Similarly, then clicking on one of the switches turns off both loads at the same time.
What did you expect to happen?
Each of the switches (Left or Right) will only control its own load.
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.28.0 commit: 03ba647
Adapter firmware version
20220219
Adapter
CC2652P2 Based Zigbee to PoE Coordinator 2022
Debug log
Same problem with _TZ3000_odzoiovu 3 Gang
I got that model: _TZ3000_bvrlqyj7 and it works fine (old paired) _TZ3000_odzoiovu is been paired today. I´m using the same z2m, just with a conbee2
So mine is been fix in the update from 1.28.0 to .1. As said before, I got other switches that was working as normal, and this one was a new addition....
@mikelpsv can you provide a screenshot of the z2m frontend -> device -> about page
@mikelpsv can you provide a screenshot of the z2m frontend -> device -> about page
Same problem with same device _TZ3000_jl7qyupf. Upgrade z2m to 1.28.1 not fixed problem.
@mikelpsv for the TS0012_switch_module I fixed it yesterday (https://github.com/Koenkk/zigbee2mqtt/issues/14750) (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)
@ZholobovSS same for your device.
edit: created my own issue https://github.com/Koenkk/zigbee2mqtt/issues/15196
TS0012_switch_module in this z2m 1.28.4-1 version The error in is fixed and it works fine. However, the same product 3gang model TS0013_switch_module still has the same problem. thank you
@slzzuk fixed!
Changes will be available in the dev branch in a few hours from now. (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)