KnoAll

I thought for context i would show the logs that I have gotten. One is from TiltPi and the other from Fermentrack so you can see how little the SG...

Not sure if the updates were meant to address this, but I'm still seeing it. Started a new brew yesterday and spikes are still happening.

I am seeing this behavior currently in a new install. I was doing some testing and discovered this after I had removed the Tilt from the test water. The chart...

Saw this on Stretch overnight. Rebooted and it re-connected to the Tilt. (Also shows the spikes in SG from the Tilt) EDIT: Also just realized that lost connection again around...

Yes sorry, Fermentrack stopped recording Tilt readings. 1. The fermenter is a stainless conical inside an upright freezer. Originally the BrewPi/Fermentrack was directly on top of the freezer but was...

fermentrack@raspberrypi:~ $ cat /usr/bin/btuart #!/bin/sh HCIATTACH=/usr/bin/hciattach SERIAL=`cat /proc/device-tree/serial-number | cut -c9-` B1=`echo $SERIAL | cut -c3-4` B2=`echo $SERIAL | cut -c5-6` B3=`echo $SERIAL | cut -c7-8` BDADDR=`printf b8:27:eb:%02x:%02x:%02x $((0x$B1 ^...

and yes, running the latest version of fermentrack from Master

ok, made the changes and rebooted. waiting to see....

OK, receiving data, fingers crossed that it is stable!

So I have not had a Tilt disconnect since changing the settings. Interestingly, I have also not had a spike in SG either.