Dan
If you undo the screws and disconnect the top PCB with the screen, there are ISP headers underneath. Use your USB ASP and the ISP header to burn the Arduino...
Not sure on that, I used whatever it gives you with the Nano device type.
Looking into this as well. Currently trying to do a refactor to make adding new menus and screens easier.
Partially complete. https://github.com/sheaivey/rx5808-pro-diversity/wiki/Guide:-Flashing-Your-Receiver https://github.com/sheaivey/rx5808-pro-diversity/wiki/Guide:-Compiling-From-Source https://github.com/sheaivey/rx5808-pro-diversity/wiki/Guide:-Changing-Your-Logo Compiling and logo change need expanded. Need examples for flashing other boards.
Air unit videos are simply not supported right now because: 1. OSD files are frame synced to DVR videos. We can't yet sync to the AU video so the overlay...
Probably from this --- assumes v2. https://github.com/Knifa/dji-moonlight-shim/blob/45bd382165dc61e3cb21c5bb6b02222c406938da/src/gfx.c#L50 Pushed a fix now. https://github.com/Knifa/dji-moonlight-shim/commit/e64965630b066c1fe0f6b9f00e8fc51d753872d2
> same with v2, tested with your package from discord > > 130|root@pigeon_wm170_gls:/ # dji-moonlight-shim WARNING: linker: ./dji-moonlight-shim: unsupported flags DT_FLAGS_1=0x8000001 2023-01-16 12:53:55.863 1430 1431 DUSS26 :DISPSRVE: icc peek failed...
@singlag can you try the packages in Discord/latest main branches? There was a delay trying to grab the packets that was giving me latency too but it's gone now. 💪
Do you have Moonlight/Gamestream configured on your PC? https://github.com/moonlight-stream/moonlight-stream.github.io The PC-side message means it's not been able to connect to that.
Just got hit with this myself. We have a number of VMs that spin up and down that run our application and the agent, and we noticed we were losing...