Sonoff-HomeAssistant

Sonoff-HomeAssistant copied to clipboard

dmwyatt

Hi, When i switch on Sonoff in homeassistant,then switch off it by Sonoff hardware button.Reboot sonoff,after sonoff connect to wifi client ,the relay while auto switch on.How can i do?I...

edabm

Hi! I need a version of this firmware which allows me to use binary sensors (in my case - tamper switches) with a Sonoff. I am pretty sure this could...

ahorndesign

Hi, the firmware works really well. However, I wonder if it is possible to deactivate the blue and green LEDs when Sonoff is switched on. I don't want to have...

TribuneX

Supports DNS Hostname for MQTT server?

2

Hi, does your firmware also allow to specify a DNS hostname for the MQTT server instead of the IP?

TribuneX

It didn't work for me, because I didn't know I had to add this "mqtt:" to the configuration file.

neotje

[REQUEST] Support for the new Sonoff RF Bridge 433

2

Request firmware support for the new Sonoff RF Bridge 433 https://www.itead.cc/sonoff-rf-bridge-433.html WiFi to 433MHz converter and vice versa to convert 433MHz RF sensors and remote to App via WiFi https://www.itead.cc/wiki/Sonoff_RF_Bridge_433...

Gamester17

retained command messages overwrite rememberRelayState feature

3

Thanks for sharing this. Perfect starting point for tinkering with sonoff devices! While testing this I found a potential problem between the recommended settings for hass (publishing command messages with...

skoslowski

:Not an issue: NodeMCU compatibility of 4 channel firmware

1

i changed the pin definition as per nodemcu but the problem is when i push button 1 the esp8266 reboot. #define BUTTON1 D5 // (Don't Change for Sonoff 4CH) #define...

officialarindam

How can i reset to default?

1

any link for making it how it was (originally) for if i wish to go back?

jamieduk