Adding a config for the anycubic-chiron

[gbit-is]

This is a fully working config for the anycubic chiron, from my research anycubic stopped shipping them with a bootloader installed sometime between 2018 and 2021.

I don't see those kind of details included in other configs but it may be relevant ? Here is my write-up on getting a bootloader on the trigorilla v.0.0.2 https://github.com/gbit-is/Trigorilla-v0.0.2-burn-bootloader/

There is one thing I wasn't sure about, that is if I should keep the extruder rotation_distance value I measured and tuned or round it up to the nearest whole number

[extruder] rotation_distance: 7.71

vs.

[extruder] rotation_distance: 8

[JamesH1978]

Thankyou for submitting this config, please could you refer to point 4 in https://github.com/Klipper3d/klipper/blob/master/docs/Example_Configs.md and other information in that doc and include the regression test, and also https://github.com/Klipper3d/klipper/blob/master/docs/CONTRIBUTING.md paying particular attention to the signed-of-by line

In terms of the rotation distance, end users are expected to tune this themselves, so it doesnt really matter.

Thanks James

[github-actions[bot]]

Thank you for your contribution to Klipper. Unfortunately, a reviewer has not assigned themselves to this GitHub Pull Request. All Pull Requests are reviewed before merging, and a reviewer will need to volunteer. Further information is available at: https://www.klipper3d.org/CONTRIBUTING.html

There are some steps that you can take now:

1. Perform a self-review of your Pull Request by following the steps at: https://www.klipper3d.org/CONTRIBUTING.html#what-to-expect-in-a-review If you have completed a self-review, be sure to state the results of that self-review explicitly in the Pull Request comments. A reviewer is more likely to participate if the bulk of a review has already been completed.
2. Consider opening a topic on the Klipper Discourse server to discuss this work. The Discourse server is a good place to discuss development ideas and to engage users interested in testing. Reviewers are more likely to prioritize Pull Requests with an active community of users.
3. Consider helping out reviewers by reviewing other Klipper Pull Requests. Taking the time to perform a careful and detailed review of others work is appreciated. Regular contributors are more likely to prioritize the contributions of other regular contributors.

Unfortunately, if a reviewer does not assign themselves to this GitHub Pull Request then it will be automatically closed. If this happens, then it is a good idea to move further discussion to the Klipper Discourse server. Reviewers can reach out on that forum to let you know if they are interested and when they are available.

Best regards, ~ Your friendly GitIssueBot

PS: I'm just an automated script, not a human being.

[github-actions[bot]]

Unfortunately a reviewer has not assigned themselves to this GitHub Pull Request and it is therefore being closed. It is a good idea to move further discussion to the Klipper Discourse server. Reviewers can reach out on that forum to let you know if they are interested and when they are available.

Best regards, ~ Your friendly GitIssueBot

PS: I'm just an automated script, not a human being.