System Error (No Code Execution)

[tannerthomas20]

Hi!

I have been trying to install Paraview on my computer for some time now. So far I can get Paraview installed with no problem. However, when I try to run the program I get the reoccurring error

"The code execution cannot proceed because msmpi.dll was not found. Reinstalling the program may fix this problem."

(Spoiler, reinstalling the program does not fix the problem)

I have tried downloading the .exe and the .zip file and I get the same error. I also cannot find the aforementioned file in the bin folder of the .zip file. What am I missing about this installation?

Thanks!

-Tanner

Windows 10 Enterprise Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz 2.11 GHz 8 GB 64-bit Operating System, x64 based processor

[jourdain]

You may want to report your issue here while also explaining more what you did? (version of PV, command line or double clicked on the paraview.exe).

If I'm not mistaken, there is no relationship with ParaViewWeb?

[aronhelser]

Yes, this is a ParaView problem. There are two versions, "MPI" and "No MPI"

• you want the "No MPI" version.

On Tue, Jan 14, 2020 at 11:08 AM Sebastien Jourdain < [email protected]> wrote:

You may want to report your issue here https://discourse.paraview.org/ while also explaining more what you did? (version of PV, command line or double clicked on the paraview.exe).

If I'm not mistaken, there is no relationship with ParaViewWeb?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Kitware/paraviewweb/issues/506?email_source=notifications&email_token=AEX6THLC6YKG4VZYFD75DCTQ5XPONA5CNFSM4KGVOJG2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI5FLWA#issuecomment-574248408, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEX6THJOXBZEHCHP3RCPRXLQ5XPONANCNFSM4KGVOJGQ .

[tannerthomas20]

Ok good to know. My intention is to run paraview in parallel with FreeCAD (i.e. be able to open an analysis from FreeCAD in ParaView). Is this still possible with the No MPI version?

Thanks

-Tanner

[QNX_EmailSigLogo_151x50]

Tanner Thomas R & D Chemist II Quanex IG Systems 800 Cochran Avenue Cambridge, Ohio 43725 www.Quanex.comhttp://www.quanex.com/

From: Aron Helser [mailto:[email protected]] Sent: Tuesday, January 14, 2020 12:50 PM To: Kitware/paraviewweb [email protected] Cc: Thomas, Tanner [email protected]; Author [email protected] Subject: [EXTERNAL] Re: [Kitware/paraviewweb] System Error (No Code Execution) (#506)

Yes, this is a ParaView problem. There are two versions, "MPI" and "No MPI"

• you want the "No MPI" version.

On Tue, Jan 14, 2020 at 11:08 AM Sebastien Jourdain < [email protected]mailto:[email protected]> wrote:

You may want to report your issue here https://discourse.paraview.org/ while also explaining more what you did? (version of PV, command line or double clicked on the paraview.exe).

If I'm not mistaken, there is no relationship with ParaViewWeb?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Kitware/paraviewweb/issues/506?email_source=notifications&email_token=AEX6THLC6YKG4VZYFD75DCTQ5XPONA5CNFSM4KGVOJG2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI5FLWA#issuecomment-574248408, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEX6THJOXBZEHCHP3RCPRXLQ5XPONANCNFSM4KGVOJGQ .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/Kitware/paraviewweb/issues/506?email_source=notifications&email_token=AOHNNXGI5QEQEAQ2XEHR67LQ5X3LLA5CNFSM4KGVOJG2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI5QR3A#issuecomment-574294252, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOHNNXD64BQG46VBAF6ACFLQ5X3LLANCNFSM4KGVOJGQ.

[aronhelser]

I have no experience with FreeCAD, but you will be able to run other apps at the same time as ParaView with either version.