Linux kernel module for Thrustmaster T300RS and T248 wheels

Current state

Playable. I've made some improvements to the dynamic updating of effects, and while still far for perfect, the experience is slowly getting better and better. Some drawbacks include possible effect inaccuracies in comparison with the Windows driver and in some games inconsistent pedal mapping. Meaning that all pedals should be detected in games, but may be mapped incorrectly.

Anycase, this version is usable in most force feedback games, supports rangesetting as well as gain and autocentering along with most force feedback effects.

Small note

While I haven't personally come across any crashes or lockups with this version, I can't promise that they won't occur under any circumstances.

With that in mind,

Installation

Dependencies

Kernel modules require kernel headers to be installed.

• Debian-based: apt install linux-headers-$(uname -r)
• Arch-based: pacman -S linux-headers
• Fedora-based: yum install kernel-devel kernel-headers

Manual installation

• Unplug wheel from computer
• git clone --recurse-submodules https://github.com/Kimplul/hid-tmff2.git
• make
• sudo make install
• Plug wheel back in
• reboot (not strictly necessary, but definitely recommended)

Done!

Note: On some systems, you will get an error/warning about SSL. This is normal for unsigned modules. For info on signing modules yourself (completely optional), see here.

DKMS

• Unplug wheel from computer
• sudo ./dkms-install.sh
• Plug wheel back in
• reboot (not strictly necessary, but definitely recommended)

Done!

:warning: Warning: There have been reports that this driver does not work if the wheel's firmware version is any other than v. 31. To update the firmware, you will have to fire up a Windows installation and update the firmware using the official Thrustmaster tools.

:warning: Warning: There was a name change when adding support for the T248 from hid-tmt300rs to hid-tmff-new, and you may have to uninstall the older version of the driver.

Additional tidbits

• Reportedly some games running under Wine/Proton won't recognize wheels without the official Thrustmaster drivers installed within the prefix. See #46.

  Note that you will still need the Linux driver, the Windows driver just installs some files needed by games to correctly recognize the Linux driver. The Windows driver itself does not work under Wine/Proton.

• Until the updated hid-tminit is upstreamed, you might want to blacklist the kernel module hid-thrustmaster. Do this with

  echo 'blacklist hid_thrustmaster' > /etc/modprobe.d/hid_thrustmaster.con
  

• If you've bought a new wheel, you will most likely have to update the firmware through Windows before it will work with this driver.

• T300 RS has an advanced F1 mode that can be activated with an F1 attachment when in PS3 mode. The base wheel will also work in PS4 mode, but it's less tested and if you encounter issues with this mode, please feel free to open up an issue about it.

• T248 isn't as extensively tested as T300 RS, please see issues and open new ones if you encounter problems. There is currently no support for the built-in screen.

• To change gain, autocentering etc. use Oversteer.

• If a wheel has a deadzone in games, you can try setting up a udev rule:

  /etc/udev/rules.d/99-joydev.rules

  SUBSYSTEM=="input", ATTRS{idVendor}=="044f", ATTRS{idProduct}=="WHEEL_ID", RUN+="/usr/bin/evdev-joystick --evdev %E{DEVNAME} --deadzone 0"
  

  where WHEEL_ID is

  Wheel	WHEEL_ID
  T300 RS, PS3 normal mode	b66e
  T300 RS, PS3 advanced mode	b66f
  T300 RS, PS4 normal mode	b66d
  T248	b696

  This should make sure that the wheel behaves like you'd want from a wheel.

• There have been reports that some games work better with a different timer period (see #11 and #10). To change the timer period, create /etc/modprobe.d/hid-tmff-new.conf and add options hid-tmff-new timer_msecs=NUMBER into it. The default timer period is 8, but numbers as low as 2 should work alright.