Add MAX6120 Precision Voltage Reference, 1.2V

[KimK]

Add MAX6120ESA Precision Voltage Reference, 1.2V, SOIC-8 Add MAX6120EUR Precision Voltage Reference, 1.2V, SOT-23-3

Signed-off-by: Kim Kirwan [email protected]

[chschlue]

Welcome and thanks for your first contribution.

Please follow the PR template and add DS links, screenshots and so on.

[KimK]

The data sheet is already in both parts .dcm tables, but here it is: https://datasheets.maximintegrated.com/en/ds/MAX6120.pdf

Additionally, there is more information (too much information?) here: https://www.maximintegrated.com/en/sitesearch.external.html?sp_q=MAX6120&charset=UTF-8 https://www.maximintegrated.com/en/products/analog/voltage-references/MAX6120.html https://www.maximintegrated.com/en/products/analog/voltage-references/MAX6120.html/tb_tab1 https://www.maximintegrated.com/en/products/analog/voltage-references/MAX6120.html/tb_tab2 https://vendor.ultralibrarian.com/Maxim/Embedded?vdrPN=MAX6120ESA%2B https://vendor.ultralibrarian.com/Maxim/Embedded?vdrPN=MAX6120EUR%2B

I have attached screenshots here:

And here:

Thanks, let me know if you need anything else.

[myfreescalewebpage]

Hi @KimK , thanks for contributing,

A few comments I have during my review:

MAX6120ESA

• [ ] Footprint should be Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
• [ ] Footprint filter should be SOIC*3.9x4.9mm*P1.27mm*
• [ ] NC pins should be added to the symbol, Passive, Invisible, on the border outline of the symbol
• [ ] You are wrong for pin name and pin numbers: pin 8 is "VIN", pin 1 is "VOUT" and pin 4 is "GND"
• [ ] Pins length should be 100mil (symbol < 100pins)
• [ ] Please remove "1.2V" inside the symbol, no other ref voltage have that

MAX6120EUR

• [ ] Description should ends with the correct package name: Low-Cost, Micropower, Precision, 3-Terminal, 1.2V Voltage Reference, SOT-23
• [ ] Footprint filter should be SOT?23*
• [ ] You are wrong for pin name: pin 1 is "VIN", pin 2 is "VOUT" and pin 3 is "GND"
• [ ] Pins length should be 100mil (symbol < 100pins)
• [ ] Please remove "1.2V" inside the symbol, no other ref voltage have that

Cheers, Joel

[myfreescalewebpage]

@KimK ping