Added Diode_Bridge_KBPC_W

[aris-kimi]

URL: https://www.diodemodule.com/bridge-rectifier/kbpc/kbpc15005w.pdf 3d PR: https://github.com/KiCad/kicad-packages3D/pull/708

Edit: Pin1 fab layer indicator added countryard layer clearance 0.25mm from fab Holes dia 1.2mm

---

All contributions to the kicad library must follow the KiCad library convention

Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items:

• [x] Provide a URL to a datasheet for the footprint(s) you are contributing
• [x] An example screenshot image is very helpful
• [x] If there are matching symbol or 3D model pull requests, provide link(s) as appropriate
• [x] Check the output of the Travis automated check scripts - fix any errors as required
• [x] Give a reason behind any intentional library convention rule violation.

---

Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above). And you can speed up the process even more by providing a dimensioned drawing of your contribution. A tutorial on how to do that is found here: https://forum.kicad.info/t/how-to-check-footprint-correctness/9279 (This is optional!)

[poeschlr]

What should the suffix "Mountpoint" mean here?

[aris-kimi]

It should have been NoMount instead, i think it is better. I wanted to point a difference from the ones with a hole in PCB for screw mount..