Ken Lucke

I'm definitely NOT seeing this, and I'm running 24/7. I do use PrintTimeGenius, so that might be the difference.

It will be a while before I can free the printer to be able to include the terminal output for the first layer, as requested.

Here are the actual speed settings from Cura:

This one is important to me, as I do a LOT of huge files, and AW not only helps the stuttering, it reduces filesize so that OctoPrint's gcode tab can...

Will do, as I said, it will be a while. I want to use the same file, so I need to use the same printer, the other one(s) are set...

Let me pull up the firmware build files and see if I can find the maximum gcode length. Any idea what it's called (I suspect something such as MAX_GCODE_LENGTH or...

OK, mine's set at the default of 96, and that command you quoted was only 58, so that's apparently not it. ```// @section serial // The ASCII buffer for serial...

> on my CR10 my first layer speed is insane on my CR10s its okay somethings is definately off with the CR10 I'm not using the default firmware, are you?...

Latest version (from the version you put out in that other thread [#138]) prints this same file fine. Strange, did you tweak anything else?

> @KenLucke, try installing this build: > > `https://github.com/FormerLurker/ArcWelderPlugin/archive/cb5e62706269bce0333017d095ace93ba815535e.zip` > > Let me know if that fixes your issue. Yes, that seems to have solved it. Thank you.