KejPi
KejPi
AppImage shoud use the libusb that in inside, it could be that it is not compatible with RPi HW and that it needs some patches for that. I am afraid...
This would indicate problems with RTL-SDR from old-dab that application uses in all official builds because lib USB is the same for both RTL-SDR and Airspy.
I was actually wrong about libusb version - the AppImage is linked with the version from system. I have rebuilt the rtlsdr and created AppImage again, could you please try...
I have tried to rebuild it with libusb 1.0.28, not sure if it was successful, could you please try: https://www.uschovna.cz/zasilka/SUAAXFBU3RMUTPLV-E7X By the way - I remember that was similar issue...
I have understood that the application was workign in past, is that correct or it never worked? If it worked in past, what is that last functional AppImage?
Fake stations are because the stick is not tuned to new frequency or buffers are not cleared properly. From the gdb trace you have shared it is obvious that libusb...
I got RPi4 for a test and I do not see any problem. I have prepared SD card with PI OS 64 bit, I updated the packages after the boot,...
I doubt that you are the only user because AppImage for AARCH64 v3.2.0 has been downloaded more than 70 times.
Anything I can implement in application to help you?
What about excluding those known channels from the scan?