KB8RCO

There are lots of comments about building in Docker to prevent strlcpy errors, but I get the exact same error, at the exact same percent complete: >> [ 32%] Building...

Removed (commented out) # add_subdirectory(tests) and the strlcpy error went away. Still working on the if(symsize < 0 || symsize > 8*sizeof(data_t)) error.

I am running docker on Kubuntu 20.04.1.  OS type is 64-bit (Ryzen 3 processor) Info from cat /proc/version: Linux version 5.15.0-52-generic ***@***.***) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils...

I am new to Docker.  Is there any way to load the previous image? Robert Giuliano KB8RCO On Thursday, November 3, 2022 at 02:32:30 PM EDT, Mikael Nousiainen ***@***.***> wrote:...

Compiled with the fix.  build directory has   RS41ng.bin   RS41ng.hexbut I don't see RS41.elf file? Robert Giuliano KB8RCO On Thursday, November 3, 2022 at 02:57:26 PM EDT, Mikael Nousiainen ***@***.***> wrote:...

Last few lines from build:Building /usr/local/src/RS41ng/build/RS41ng.bin   text    data     bss     dec     hex filename  50604    1512    5160   57276    dfbc RS41ng.elf [100%] Built target RS41ng.elf RS41ng build complete At [100%] Built target RS41.elf...

Found it!Okay, so I just have to flash one of my RS41SGP sondes with this. I am not using the Si5351, so enabled GPS serial output.  That should give me...

Well, I programmed the RS41, and I think I bricked it. Nothing seems to be happening, and now the LEDs don't do anything when I press the button. I tried...

I did power cycled the sonde right after programming.I powered the sonde through the ST-Link per: Steps to flash the firmware 1. Remove batteries from the sonde2. Connect an ST-LINK...

Ben - Thanks for the reply!I tried fresh batteries and left them in for quite some time.  Pressed the button and waited some time as well (in case default was...