Marlin icon indicating copy to clipboard operation
Marlin copied to clipboard

Published 20 hours ago • verified publisher icon Jyers

Full Update JYERSUI with latest Marlin bugfix_2.1.x

Open LCh-77 opened this issue 1 year ago • 15 comments

This pull request modernizes JYERSUI while respecting the authorship, philosophy and code of Jacob. Some modules were modded by me to be used in the UI, proper authorship is cited. You are totally free to use.

  • PID plot
  • Gcode preview
  • Host Action Menu
  • Colorize UI
  • Junction Deviation
  • LED lights control
  • Shows boot screen when reset the printer
  • Firmware retracts menu
  • Off line, on click and live Z-Offset
  • Mesh leveling active indicator
  • Selectable 115200/250000 baud rate
  • Live brightness change
  • Support for M75 Filename to print
  • Probe settings menu
  • Endstop diagnostic
  • Screen lock

LCh-77 avatar Jul 18 '22 19:07 LCh-77

Thanks for this! Would you be able to provide builds?

ThomDietrich avatar Jul 28 '22 06:07 ThomDietrich

Thanks for this! Would you be able to provide builds?

I'd also be interested in this if you have time @LCh-77 . Thank you!

MiketheMaker18 avatar Jul 28 '22 19:07 MiketheMaker18

Anyone noticed any bugs?

Hologos avatar Aug 16 '22 12:08 Hologos

Thanks for this! Would you be able to provide builds?

Maybe but only for Ender3V2 4.2.2

LCh-77 avatar Aug 22 '22 07:08 LCh-77

Would be fine with me, but maybe you could give a few hints regarding relevant settings and compilation!? Thanks!!

ThomDietrich avatar Aug 22 '22 09:08 ThomDietrich

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

LCh-77 avatar Aug 23 '22 05:08 LCh-77

Going to give this a test shortly. Using E3V2

MiketheMaker18 avatar Aug 23 '22 22:08 MiketheMaker18

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

There's a mistake . I printed a calibration cube. After pressing the file, the screen does not exit. Printer stays on print screen. It is necessary to turn the machine off and on to return to the main menu.

EntasDisk avatar Aug 25 '22 09:08 EntasDisk

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

There's a mistake . I printed a calibration cube. After pressing the file, the screen does not exit. Printer stays on print screen. It is necessary to turn the machine off and on to return to the main menu.

Fixed in the release, thanks.

LCh-77 avatar Aug 25 '22 18:08 LCh-77

I posted a release: https://github.com/LCh-77/Marlin/releases/tag/BLTUBL-LA Also now the Enhanced branch comes with working configuration files.

There's a mistake . I printed a calibration cube. After pressing the file, the screen does not exit. Printer stays on print screen. It is necessary to turn the machine off and on to return to the main menu.

Fixed in the release, thanks.

I also had the issue. I went through about every menu and it seems to be working really well. Thank you!

MiketheMaker18 avatar Aug 25 '22 20:08 MiketheMaker18

You are welcome.

LCh-77 avatar Aug 25 '22 21:08 LCh-77

Is there a way to revert Default (brown) menu color to the color code of creality?

elusivestudio avatar Sep 30 '22 15:09 elusivestudio

@LCh-77 what's the difference between the 422 and 427? I tried the 427 and installed fine on ender 3v2 but was unable to home or move (x,y). I then replaced it with 422 and that seems to work fine.

rhawley88 avatar Jan 27 '23 22:01 rhawley88

Never mind been so long since iv flashed forgot its the main board

rhawley88 avatar Jan 28 '23 04:01 rhawley88

Hey guys, I didn't get around to perform the update yet. Did anyone by any chance compare this release to this other project? https://github.com/mriscoc/Ender3V2S1/wiki

Anything unique in this PR here?

ThomDietrich avatar Feb 08 '23 13:02 ThomDietrich