plane-notify
plane-notify copied to clipboard
Jxck-S
Not giving the expected output
I recently tried using this program to post status of a particular plane on one of my Discord channels, but the issue is, it isn't giving any output. On cross-verifying with adsb-exchange, although the plane being is in thr air it doesn't display any output, neither on the virtual machine nor on the channel. If you could please look into this matter and let me if there's any wrong being done on my part, it would be really helpful.
On running the program, the webhook set for bot alerts gives me a notification of it starting and therafter shows nothing on
the channel but this is the view from the instance
It isn't showing any flight-data even though the plane in question is still in the air.
Discord Channel Output
Thanks in advance✌️
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running.
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
OK, I'm running the program with that ICAO you are using (A16579) and as soon as it takes off I'll let you know here what the outputs are for me. So then we might figure if there's something wrong in your side or elsewhere. Could be ASDBX information that are not reliable.
Meanwhile, if you want to try this ICAO on your program: AE6A36, it's an USAF helicopter that have being very active, so it won't take long for you to find out what the outputs are for you.
B0nz
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
OK, I'm running the program with that ICAO you are using (A16579) and as soon as it takes off I'll let you know here what the outputs are for me. So then we might figure if there's something wrong in your side or elsewhere. Could be ASDBX information that are not reliable.
Meanwhile, if you want to try this ICAO on your program: AE6A36, it's an USAF helicopter that have being very active, so it won't take long for you to find out what the outputs are for you.
B0nz
Well, plane took off and worked here. Probably something wrong there. Can you send ss or content of planet.ini?
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
OK, I'm running the program with that ICAO you are using (A16579) and as soon as it takes off I'll let you know here what the outputs are for me. So then we might figure if there's something wrong in your side or elsewhere. Could be ASDBX information that are not reliable.
Meanwhile, if you want to try this ICAO on your program: AE6A36, it's an USAF helicopter that have being very active, so it won't take long for you to find out what the outputs are for you.
B0nz
Well, plane took off and worked here. Probably something wrong there. Can you send ss or content of planet.ini?
For some reason it didn't work for me? What application are you using this with? Discord, Twitter or Pushbullet.
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
OK, I'm running the program with that ICAO you are using (A16579) and as soon as it takes off I'll let you know here what the outputs are for me. So then we might figure if there's something wrong in your side or elsewhere. Could be ASDBX information that are not reliable. Meanwhile, if you want to try this ICAO on your program: AE6A36, it's an USAF helicopter that have being very active, so it won't take long for you to find out what the outputs are for you. B0nz
Well, plane took off and worked here. Probably something wrong there. Can you send ss or content of planet.ini?
For some reason it didn't work for me? What application are you using this with? Discord, Twitter or Pushbullet.
I'm using Twitter and Telegram (Telegram I coded myself, it's not available in this repository, at least yet), but I get output information in terminal and that image is the one is sent to Twitter and Telegram, not the Tweet. Can you share the content of you Planet.ini without sensitive informations, such as API and so on?
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
OK, I'm running the program with that ICAO you are using (A16579) and as soon as it takes off I'll let you know here what the outputs are for me. So then we might figure if there's something wrong in your side or elsewhere. Could be ASDBX information that are not reliable. Meanwhile, if you want to try this ICAO on your program: AE6A36, it's an USAF helicopter that have being very active, so it won't take long for you to find out what the outputs are for you. B0nz
Well, plane took off and worked here. Probably something wrong there. Can you send ss or content of planet.ini?
For some reason it didn't work for me? What application are you using this with? Discord, Twitter or Pushbullet.
I'm using Twitter and Telegram (Telegram I coded myself, it's not available in this repository, at least yet), but I get output information in terminal and that image is the one is sent to Twitter and Telegram, not the Tweet. Can you share the content of you Planet.ini without sensitive informations, such as API and so on?
Everything looks correct. I'd suggest you to start over, git clone again and so on to see if it works. Did you use the "pipenv run python main" (what actually works for me is 'pipenv run python3 main.py')?
Everything looks correct. I'd suggest you to start over, git clone again and so on to see if it works. Did you use the "pipenv run python main" (what actually works for me is 'pipenv run python3 main.py')?
I ran the following commands:
- pipenv run python3 main.py
- pipenv run python main.py
- python3 main.py
- python main.py
All of the above gave me the same results
It doesn't work!
If you don't mind could you put up a screenshot of your mainconf.ini and planeconf.ini while censoring the private information so that I could compare and see what's wrong?
You might have revealed your ADSB-Exchange API Key, you might want to change it
Sorry taking so long to answer, busy days irl.
Was the program running when the plane took off or landed? As far as I could understand, you won't get a notification if the plane is flying on on the ground when the program starts. You'll only get a notification when the plane take off or land while the program is running?
Yes, the plane did land and takeoff while the program was running. I thought it would display information such as flight atitude, autopilot enabled and so on but it isn't display anything useful at all 🤷
OK, I'm running the program with that ICAO you are using (A16579) and as soon as it takes off I'll let you know here what the outputs are for me. So then we might figure if there's something wrong in your side or elsewhere. Could be ASDBX information that are not reliable. Meanwhile, if you want to try this ICAO on your program: AE6A36, it's an USAF helicopter that have being very active, so it won't take long for you to find out what the outputs are for you. B0nz
Well, plane took off and worked here. Probably something wrong there. Can you send ss or content of planet.ini?
For some reason it didn't work for me? What application are you using this with? Discord, Twitter or Pushbullet.
I'm using Twitter and Telegram (Telegram I coded myself, it's not available in this repository, at least yet), but I get output information in terminal and that image is the one is sent to Twitter and Telegram, not the Tweet. Can you share the content of you Planet.ini without sensitive informations, such as API and so on?
Could you upload your code onto a private repo and then add me a collaborator? I just wanted to understand what exactly is going wrong.
Anyone still running into this issue? Im having a similar issue but with Discord. Thanks!
Anyone still running into this issue? Im having a similar issue but with Discord. Thanks!
Are you able to run it with other mediums?